Marlon, In StarOS, Briding is done in the IP Configuration screen. (Interfaces, wpci1, IP Assignments). Then on the bottom of the screen there is a section "ethernet bridge Number". Simply change the number to "1". Then repeat for (interfaces, ether1,ip assignments) and also change that bridge number to "1". You just created a bridge between two interfaces.
PS. When you go to change the bridge number, you have to highlight and overtype the existing number 0, or it won't let you change the field. I know that sounds obvious, but it fooled some people, asking "why the filed couldn;t be changed". The other thing to note is that StarOS does Automatic WDS. When you set up the bridge it will automatically allow true bridging via WDS, without you setting up anything specific. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: "Marlon K. Schafer" <[EMAIL PROTECTED]> To: "WISPA General List" <[email protected]> Sent: Tuesday, June 10, 2008 6:33 PM Subject: [WISPA] star os config help > Hi All, > > I have a 4000 ap. I'll only be using one radio card and the ethernet. > > I can't figure out how to turn it into a bridge ap. Can anyone tell me > where to look? > > The only thing I've found so far talks about bridging is spanning tree > (not > helpful) and some kind of rf to rf bridge thingy. Also not helpful. > > Can anyone take the time to walk me through the setup on this box? Kindly > send your phone number (off list) and I'll call you around 8 or 8:30 am > tomorrow (wed). > > Thanks!!! > marlon > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
