I really don't get how V3 is difficult to figure out. Before I was doing this, I was dragging phone/data cables for the AF. Before that I ran a Husqvarna for a logging company. Before that, I worked on a small ranch. I'm a pretty common sence kind of guy and don't like things that don't work right or are setup wrong. I'm about the farthest thing from the typical "Admin" guy there is, but somehow through my country way of thinking I figured out V3. Then I figured out how to subnet and route. I got tossed into this wireless stuff with absolutely no idea of what I was doing, but I figured that out too.
The interface is actually really nice. I have a customer right now that has a bad radio card. Their latency is about 300ms and about 40% packet loss. I can still log into their radio and fly through the settings just like nothing is wrong. Try that with a web based gui. The reason we got away from Tranzeo is because, they don't work well. In the face of interference, of any little bit, they folded like a lawn chair. Granted this was back in the TR-CPE days, not sure about the new stuff, and don't really care. But we were swapping them out left and right with any WAR board we could find and lovin' every minute of it. I remember my techs telling me how much better this new equipment was compared to the Tranzeos, and these guys were green horns not veterans. They didn't have a set way of thinking which made the transition really easy for them. You don't have to be a geek to figure out V3, just a little free time and internet access. On Thu, Jun 12, 2008 at 11:39 AM, Marlon K. Schafer <[EMAIL PROTECTED]> wrote: > > ----- Original Message ----- > From: "George Rogato" <[EMAIL PROTECTED]> > To: "WISPA General List" <[email protected]> > Sent: Wednesday, June 11, 2008 9:28 AM > Subject: Re: [WISPA] star os config help- clarifying my message > > >> You'll forget that you weren't familiar with it after you get used to >> them. It's just like getting a cisco router for your first time and then >> trying to figure out where to start. > > Grin. That's part of why I do NOT use Cisco anymore! > >> Sort of like walking in a dark room >> blindfolded for the first time, where am I? > > Um, if it were *me*, I'd TURN ON THE LIGHT!!!! > > marlon > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Chad Halsted The Computer Works Conway, AR www.tcworks.net -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
