Not really trying to defend star. The documentation issue has been around since Adam met Eve.
The learning curve appears to be steep, but in fact, there is pretty good documentation. If you search the forums, you will pretty much find anything you need to know. Trick is first searching the forums. Then there is Tog's WiKi that is pretty good. Tog has put a lot of time into the WiKi and helping others with their star stuff. One thing I might add, one reason it's hard to document star, it's always changing, and how do you document l7 filtering or isc dhcp easily? Fortunately Tog and a few other smart guys hang out there and try to offer their help when they can. Good luck Ralph. George ralph wrote: > I just re-read it and need to clarify. > I put addresses from the same subnet on all interfaces because it seemed > that an address was required per the blanks to fill in. It was never > documented to only put an address on one interface. > With other products, you don't really program the other interfaces, so you > aren't inclined to make that mistake. > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
