Mission critical equates to multiple paths and technologies in my book. Network hardware can break whether it costs $100 or $100,000.
I would consider a licensed & unlicensed combination for this path. If your sites will allow you could go with 6GHz and a 5Ghz failover path. Both links could probably use the same 6' antenna with a dual polarity feed, but then again you are depending on one common point of failure by serving this "mission critical" site with two links from the same upstream site. The better solution would be to feed the site from completely diverse upstream paths. Best, Brad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RickG Sent: Tuesday, June 17, 2008 11:03 PM To: WISPA General List Subject: [WISPA] mission critical 100Mbps links Any opinions on 100Mbps radios for mission critical 100Mbps PTP links? I need to go 10-15 miles. Licensed or unlicensed OK. -RickG ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
