I think you are cpu limited. our setup: 2.4GHz P4 1Gbyte with cm9 card 45ft of lmr-400 between ant and card RB532A with cm9 card 5.18GHz link -68db @ 6Mbps -77db @ 54Mbps link 3200ft Netstream mode, best fit TCP thruput (either direction) 26.4Mbps This is our primary link from our fiber shed to our main dist. tower [EMAIL PROTECTED] wrote: We have a 5ghz backhaul PTP link with MT 532 on one end and 411 on the other. We have a -57 signal ccq in 100% and a potential throughput listed as 30 Mbps on a solid 54M link. However I can never push more than 20 megs through it.? Anyone else have a simular setup doing better? Were using Nstream best fit.Thanks, John Buwa -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ |
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/