Are you bridging or routing through this link? I have not been a big fan of the 532 as a backhaul solution, I was never really excited unless it was a PC based MikroTik, then I could push some real bandwidth. But that all changed when the 333 and the 433 came out.
Man oh man, don't I love those units! Cameron Midcoast Internet -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, August 28, 2008 11:15 PM To: WISPA General List Subject: [WISPA] Throughput MT We have a 5ghz backhaul PTP link with MT 532 on one end and 411 on the other. We have a -57 signal ccq in 100% and a potential throughput listed as 30 Mbps on a solid 54M link. However I can never push more than 20 megs through it.? Anyone else have a simular setup doing better? Were using Nstream best fit. Thanks, John Buwa ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
