I am wondering about a resolution on this. I had a failing StarOS Board so I switched out to a Mikotik RB411 v3.10. Now all 45 of my clients (all are Tranzeo) reset every few minutes. Normally <5min.
I have also noticed that at times the signal Strength on my clients go super high like a client at -68 will be at -98. However, if I ping that client they drop back to the -68. As soon as you stop the Ping the signal strength on the AP goes back to -99. If I reboot the Radio it sets everyone back to Really good signal strength for a while then it starts to climb. I had no one over -80 on the star board. I just had 12 clients the MT said was at -112 to -116. Ping them and during the ping they are back to -68. Help. I will be a guinea pig if someone wants to look at my tower from MT. it can't get much Worse. Steve Barnes Executive Manager PCS-WIN RCWiFi Wireless Internet Service (765)584-2288 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/