My read is that any 'portable or nomadic' device would be 100 or 40 mW EiRP and therefore not very useable for user self install unless a client was close to the AP.
Kevin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Valenti Sent: Wednesday, November 19, 2008 2:34 PM To: WISPA General List Subject: Re: [WISPA] TVBD height requirement Mike, On page 5 in section 8 (Fixed devices), it says "fixed devices will be required to operate with antennas mounted outdoors ..." I suppose you could run coax from a TVBD inside, but it seems like the current method of POE to an outdoor device is preferred? So we are still looking at professional installation, outdoors? John On Nov 19, 2008, at 1:48 PM, Mike Hammett wrote: > There previously was some discussion about a 10 meter antenna height > requirement in the TVWS. > > I'm only on page 43 of the report, but on this page it states that > the FCC doesn't see a need for either a height or an outdoor > requirement, only a 40 cm distance away from people. This is to > comply with the most restrictive MPE distance required by the > frequencies in use. > > TVWS = TeleVision White Spaces > TVBD = TeleVision Band Device ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
