Re: [WISPA] TVBD height requirement

Wed, 19 Nov 2008 18:34:37 -0800

With the cost and loss's of RG6 cable, it might sense to have all the active stuff inside.

John Valenti wrote: 
Mike,
On page 5 in section 8 (Fixed devices), it says  "fixed devices will  
be required to operate with antennas mounted outdoors ..."

I suppose you could run coax from a TVBD inside, but it seems like the  
current method of POE to an outdoor device is preferred?  So we are  
still looking at professional installation, outdoors?

John


On Nov 19, 2008, at 1:48 PM, Mike Hammett wrote:

  
There previously was some discussion about a 10 meter antenna height  
requirement in the TVWS.

I'm only on page 43 of the report, but on this page it states that  
the FCC doesn't see a need for either a height or an outdoor  
requirement, only a 40 cm distance away from people.  This is to  
comply with the most restrictive MPE distance required by the  
frequencies in use.

TVWS = TeleVision White Spaces
TVBD = TeleVision Band Device
    



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/
  


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to