*nods*  It shouldn't perform any differently than any other XR series of 
radio with settings other than frequency the same.

Well, RF-wise it'll be different, but not data wise.


-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com



--------------------------------------------------
From: "Mark Nash" <[EMAIL PROTECTED]>
Sent: Friday, November 21, 2008 10:37 AM
To: <[EMAIL PROTECTED]>; "WISPA General List" <wireless@wispa.org>
Subject: Re: [WISPA] Ubiquiti 3.65

> Yes, but my message wasn't clear.  When I said
>
> "We have a link that sits at -50 and its max on a 40MHz channel is 70mbps
> aggregate."
>
> I wasn't talking about the 3.65 link
>
>
> Mark Nash
> UnwiredWest
> 78 Centennial Loop
> Suite E
> Eugene, OR 97401
> 541-998-5555
> 541-998-5599 fax
> http://www.unwiredwest.com
> ----- Original Message ----- 
> From: "Jeff Booher" <[EMAIL PROTECTED]>
> To: "'WISPA General List'" <wireless@wispa.org>
> Sent: Friday, November 21, 2008 8:34 AM
> Subject: Re: [WISPA] Ubiquiti 3.65
>
>
>> Isnt a 40mhz channel in 3.65ghz against the rules?
>>
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>> Behalf Of Mark Nash
>> Sent: Thursday, November 20, 2008 4:03 PM
>> To: WISPA General List
>> Subject: Re: [WISPA] Ubiquiti 3.65
>>
>> I really can't remember about throughput.  This was really what the board
>> would do, not the card.  We felt it was the max that the board/card/snr
>> could give which was encouraging as this is on a site that we've had a 
>> TON
>> of 5 GHz noise.  Our specific application had a much lower need than the
>> test results gave, so that's why I don't remember.  In other words, the
>> spectrum was clean, and nice for a change.
>>
>> It was a StarOS WAR4-WP188 board, 64MB with 8 MB flash and 533MHz IXP-425
>> CPU.
>>
>> Nice boards.  We have a link that sits at -50 and its max on a 40MHz
> channel
>> is 70mbps aggregate.
>>
>> ----- Original Message -----
>> From: "Matt" <[EMAIL PROTECTED]>
>> To: "WISPA General List" <wireless@wispa.org>
>> Sent: Thursday, November 20, 2008 3:50 PM
>> Subject: Re: [WISPA] Ubiquiti 3.65
>>
>>
>> >> Using StarOS, we have tested them with 3.5GHz antennas.  They got what
> we
>> >> would expect them to get with respect to SNR, with a slight loss due 
>> >> to
>> >> the
>> >> 3.5GHz antennas.
>> >>
>> >> Two issues...
>> >>
>> >> 1.  We purchased some of the original XR3's, but then they came out
> with
>> >> the
>> >> new version XR3 - 3.7 which had different center frequencies so they
>> >> would
>> >> not associate with the original XR3 that we had at the AP.
>> >>
>> >> 2.  We have had 3 of the XR3 - 3.7 radios that have either lost a
>> >> significant amount of signal from the AP, or stopped associating
>> >> altogether.
>> >> On the StarOS forums, there was some talk of this be attirbuted to non
>> >> grounding thet antennas.  But as it stands, I think we had 3 bad
> radios,
>> >> then the 3 that we originally bought that are useless now due to the
>> >> center
>> >> frequency issue.  At $260 per radio, that's alot of $$ in useless
> radios.
>> >
>> > What kind of throughput are you getting?
>> >
>> > Matt
>> >
>> >
>> >
>> --------------------------------------------------------------------------
> --
>> ----
>> > WISPA Wants You! Join today!
>> > http://signup.wispa.org/
>> >
>> --------------------------------------------------------------------------
> --
>> ----
>> >
>> > WISPA Wireless List: wireless@wispa.org
>> >
>> > Subscribe/Unsubscribe:
>> > http://lists.wispa.org/mailman/listinfo/wireless
>> >
>> > Archives: http://lists.wispa.org/pipermail/wireless/
>> >
>>
>>
>>
>>
>> --------------------------------------------------------------------------
> --
>> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------
> --
>> ----
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
>> --------------------------------------------------------------------------
> ------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------
> ------
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
> 


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to