RMA to Ubiquiti? Wouldnt you RMA to the distributor you purchased it from? -RickG
On Mon, Jan 26, 2009 at 1:20 AM, rabbtux rabbtux <rabb...@gmail.com> wrote: > Anyone ever rma a Nanostation? Ubiquity good to work with? > > > On 1/25/09, Josh Luthman <j...@imaginenetworksllc.com> wrote: >> Just remember to use Eje's POE calculator first! :) >> >> On 1/26/09, Jerry Richardson <jrichard...@aircloud.com> wrote: >>> Pretty happy with the dozen or so we have out there. No issues at all >>> other than one on a 350' run of cat5 that needed at 24V power supply to >>> be stable. >>> >>> Forrest pulled one apart and said the power supply max is around 18V so >>> use caution on overpowering. >>> >>> >>> >>> __________________________________ >>> Jerry Richardson >>> airCloud Communications >>> >>> >>> ________________________________ >>> >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> Behalf Of Blair Davis >>> Sent: Sunday, January 25, 2009 8:04 PM >>> To: WISPA General List >>> Subject: Re: [WISPA] Nanostation support, tips, etc. >>> >>> >>> Yes, it does. runs over 200ft have been unreliable with the 12VDC >>> supply. Needing power cycling 2-3 times a day. >>> >>> Josh Luthman wrote: >>> >>> I don't believe you'll lose voltage over a 150 ft line when >>> you're >>> only pulling an amp or two, but I could be wrong. >>> >>> Have you experienced something that proves me wrong? >>> >>> On 1/25/09, Blair Davis <the...@wmwisp.net> >>> <mailto:the...@wmwisp.net> wrote: >>> >>> >>> Use a hose clamp, instead of the included zip ties, to >>> mount outdoors. >>> >>> If network cable is longer than 150ft, use an 18VDC >>> power supply instead of >>> the included 12VDC supply. >>> >>> If talking to an older 'B' only AP, set the radios to >>> 'B' only mode. >>> >>> Adaptive antenna mode is not worth using. >>> >>> Make sure to update units to 3.x.x firmware. Many are >>> still shipping with >>> 2.1.x. >>> >>> All this is for the NS2 units. I've never used the >>> NS5's. >>> >>> Good support, via their fourm. >>> >>> Haven't had and DOA's or needed to RMA any of these yet. >>> >>> >>> >>> rabbtux rabbtux wrote: >>> >>> >>> We are considering using these units for 2 and 5 >>> GHz Cpe. What is >>> your experience with ubiquiti support, failure >>> rates, and any >>> deployment tips? I sure like what we see in our >>> evaluation. >>> >>> Thanks in advance, >>> Marshall >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >> -- >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> Those who don't understand UNIX are condemned to reinvent it, poorly. >> --- Henry Spencer >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > -- > Sent from my mobile device > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
