Drill very slowly at first. Sharp drill bits.
Drill a little, stop, reverse the bit, or pull it out and make sure that nothing is caught on it etc. Worse case, we cut a small slit in the carpet and go down through that. marlon ----- Original Message ----- From: "RickG" <rgunder...@gmail.com> To: "WISPA General List" <wireless@wispa.org> Sent: Saturday, February 14, 2009 8:09 AM Subject: [WISPA] Berber carpet > How do you guys drill holes through berber carpet withour pulling the > threads? > I have the "cutting tool" but thread still grab onto the drill bit. > I've thought about finding a metal tube to put the drill into so it > doesnt catch the carpet. > Thoughts? > -RickG > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
