Is there any reason you don't just cut an X in the carpter and then trim it?
John >-----Original Message----- >From: John Scrivner [mailto:j...@scrivner.com] >Sent: Saturday, February 14, 2009 08:18 AM >To: 'WISPA General List' >Subject: Re: [WISPA] Berber carpet > >You need to use a sharp razor knife to cut a slit about 3 inches long along >the grain of the carpet. Then hold the carpet to the side as you drill. >Scriv > > >On Sat, Feb 14, 2009 at 10:09 AM, RickG <rgunder...@gmail.com> wrote: > >> How do you guys drill holes through berber carpet withour pulling the >> threads? >> I have the "cutting tool" but thread still grab onto the drill bit. >> I've thought about finding a metal tube to put the drill into so it >> doesnt catch the carpet. >> Thoughts? >> -RickG >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > >-------------------------------------------------------------------------------- >WISPA Wants You! Join today! >http://signup.wispa.org/ >-------------------------------------------------------------------------------- > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
