I have used custom made ones from Tessco as well as the pre mades ones from Wisp Router and other places. The last few years I have not had any problems though it may have been due to the fact we put so much coax seal around them. Do you seal it with coax seal (or comparable material)?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer On Wed, Mar 4, 2009 at 12:18 PM, Mark Nash <markl...@uwol.net> wrote: > We have had about 6 of these fail in the last few months, whereas prior to > that we don't recall a problem. They are 2-ft NM-NM LMR195 jumpers from > Hyperlink. > > Anyone else have a problem? > > Any recommendations on best source for them? > > We normally only use them on backhauls & APs, so when they go bad it's a > big frustrating problem. > > Mark Nash > UnwiredWest > 78 Centennial Loop > Suite E > Eugene, OR 97401 > 541-998-5555 > 541-998-5599 fax > http://www.unwiredwest.com > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/