I use two layers of tape with the coaxseal in between. This protects the
connectors and allows clean removal of the coaxseal. In addition, the tape
seems to hold up better to the weather than the coaxseal.
To be honest, I'd rather get rid of weather proofing altogether and just POE
everywhere. Unfortunately, I have found any good sector antennas with radios
build in. Then again, it is lame to replace an antenna due to a bad radio.
The Ubiquiti Bullets have potential for this use but I suspect you still
need to weather proof the connector. Also, whiel they have a lot of
capabilities, I havent found a way to shape individual users bandwidth if
they are used as an AP. I guess migrate bandwidth shaping to the user side?

-RickG

On Thu, Mar 5, 2009 at 1:24 PM, Mark Nash <markl...@uwol.net> wrote:

> Is the electrical tape just to hold the coax-seal in place?
>
> Mark Nash
> UnwiredWest
> 78 Centennial Loop
> Suite E
> Eugene, OR 97401
> 541-998-5555
> 541-998-5599 fax
> http://www.unwiredwest.com
> ----- Original Message -----
> From: "RickG" <rgunder...@gmail.com>
> To: "WISPA General List" <wireless@wispa.org>
> Sent: Thursday, March 05, 2009 10:01 AM
> Subject: Re: [WISPA] Best Practice: Sealing Coax Connectors WAS:
> HyperlinkCoax Jumpers
>
>
> > Coaxseal and good electrical tape. LOL, I had one tower where the pigeons
> > would peck at the connectors, so I added metal foil tape over the
> > connection. That took care of that!
> > -RickG
> >
> > On Thu, Mar 5, 2009 at 12:53 PM, Mark Nash <markl...@uwol.net> wrote:
> >
> > > The only thing we use to seal these connectors is fusion tape from GB.
> I
> > > can get it from the local hardware store.  I suspect that this is a
> > > problem.
> > >
> > > How is everyone sealing connectors on towers?  This one particular site
> is
> > > at 3100ft so it gets wind and cold.  Snow & ice on it for a few 2-week
> > > periods per year.  Lots of rain during the winter.  It's been the worst
> for
> > > coax failures.
> > >
> > > Mark Nash
> > > UnwiredWest
> > > 78 Centennial Loop
> > > Suite E
> > > Eugene, OR 97401
> > > 541-998-5555
> > > 541-998-5599 fax
> > > http://www.unwiredwest.com
> > > ----- Original Message -----
> > > From: "Josh Luthman" <j...@imaginenetworksllc.com>
> > > To: "WISPA General List" <wireless@wispa.org>
> > > Sent: Wednesday, March 04, 2009 9:22 AM
> > > Subject: Re: [WISPA] Hyperlink Coax Jumpers
> > >
> > >
> > > > I have used custom made ones from Tessco as well as the pre mades
> ones
> > > from
> > > > Wisp Router and other places.  The last few years I have not had any
> > > > problems though it may have been due to the fact we put so much coax
> seal
> > > > around them.  Do you seal it with coax seal (or comparable material)?
> > > >
> > > > Josh Luthman
> > > > Office: 937-552-2340
> > > > Direct: 937-552-2343
> > > > 1100 Wayne St
> > > > Suite 1337
> > > > Troy, OH 45373
> > > >
> > > > Those who don't understand UNIX are condemned to reinvent it, poorly.
> > > > --- Henry Spencer
> > > >
> > > >
> > > > On Wed, Mar 4, 2009 at 12:18 PM, Mark Nash <markl...@uwol.net>
> wrote:
> > > >
> > > > > We have had about 6 of these fail in the last few months, whereas
> prior
> > > to
> > > > > that we don't recall a problem.  They are 2-ft NM-NM LMR195 jumpers
> > > from
> > > > > Hyperlink.
> > > > >
> > > > > Anyone else have a problem?
> > > > >
> > > > > Any recommendations on best source for them?
> > > > >
> > > > > We normally only use them on backhauls & APs, so when they go bad
> it's
> > > a
> > > > > big frustrating problem.
> > > > >
> > > > > Mark Nash
> > > > > UnwiredWest
> > > > > 78 Centennial Loop
> > > > > Suite E
> > > > > Eugene, OR 97401
> > > > > 541-998-5555
> > > > > 541-998-5599 fax
> > > > > http://www.unwiredwest.com
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> >
> >
> --------------------------------------------------------------------------
> > > ------
> > > > > WISPA Wants You! Join today!
> > > > > http://signup.wispa.org/
> > > > >
> > > >
> > > >
> >
> >
> --------------------------------------------------------------------------
> > > ------
> > > > >
> > > > > WISPA Wireless List: wireless@wispa.org
> > > > >
> > > > > Subscribe/Unsubscribe:
> > > > > http://lists.wispa.org/mailman/listinfo/wireless
> > > > >
> > > > > Archives: http://lists.wispa.org/pipermail/wireless/
> > > > >
> > > >
> > > >
> > > >
> >
> >
> --------------------------------------------------------------------------
> > > ------
> > > > WISPA Wants You! Join today!
> > > > http://signup.wispa.org/
> > > >
> >
> >
> --------------------------------------------------------------------------
> > > ------
> > > >
> > > > WISPA Wireless List: wireless@wispa.org
> > > >
> > > > Subscribe/Unsubscribe:
> > > > http://lists.wispa.org/mailman/listinfo/wireless
> > > >
> > > > Archives: http://lists.wispa.org/pipermail/wireless/
> > > >
> > >
> > >
> > >
> > >
> >
> >
> --------------------------------------------------------------------------
> ------
> > > WISPA Wants You! Join today!
> > > http://signup.wispa.org/
> > >
> >
> >
> --------------------------------------------------------------------------
> ------
> > >
> > > WISPA Wireless List: wireless@wispa.org
> > >
> > > Subscribe/Unsubscribe:
> > > http://lists.wispa.org/mailman/listinfo/wireless
> > >
> > > Archives: http://lists.wispa.org/pipermail/wireless/
> > >
> >
> >
> >
> --------------------------------------------------------------------------
> ------
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> --------------------------------------------------------------------------
> ------
> >
> > WISPA Wireless List: wireless@wispa.org
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to