On Fri, 2009-04-24 at 12:22 -0400, Cameron Kilton wrote: > I was playing around on one of our wireless interfaces and couldn't help > but notice the options in the wireless tab for: > > Default AP Tx Rate: > And > Default Client TX Rate:
These 2 options set default rates for how much bandwidth is allocated to a station for upload (client tx) and download (ap tx). It is a layer 2 bandwidth limiter that really only works with other MT devices. Actually, the AP tx rate works with any device, but the client tx does not work with all other devices out there. -- ******************************************************************** * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/ * Network Engineering * * http://www.wispa.org/ * WISPA Board Member * * http://blog.butchevans.com/ * Wired or Wireless Networks * ******************************************************************** -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
