Nothing associated on the Virtual. The propagation was back out via the wire interface. I would not think it should matter if anything is connected. The interface is active, it has an address. That address range should be propagated by OSPF. I will be at the site tomorrow. I will connect to the VirtualAP and see if that matters.
Dennis Burgess - LinkTechs.net wrote: > Is something connected to the VAP? Why would it send if its on the > physical unless the other end is connected to the physical ap vs the vap. > > * ----------------------------------------------------------- > Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer > WISPA Board Member - wispa.org <http://www.wispa.org/> > Link Technologies, Inc -- Mikrotik & WISP Support Services > WISPA Vendor Member* > *Office*: 314-735-0270 *Website*: http://www.linktechs.net > <http://www.linktechs.net/> > */ LIVE On-Line Mikrotik Training <http://www.onlinemikrotiktraining.com>/* > > The information transmitted (including attachments) is covered by the > Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended only > for the person(s) or entity/entities to which > it is addressed and may contain confidential and/or privileged material. Any > review, retransmission, dissemination or other use of, or taking of any > action in reliance upon, this information by persons or entities other than > the intended recipient(s) is prohibited, If you > received this in error, please contact the sender and delete the material > from any computer. > > > > > > Scott Reed wrote: > >> Yep, that is what I said in the original post. >> Put the IP on the VirtualAP and no route prorogation. >> Put it on the physical and it propagates. So the question is, why does >> the route not propagate from the VirtualAP? And is that corrected in v3.x? >> I assumed the VirtualAP was just like any other interface, put maybe not. >> I may try putting it in a bridge and addressing the bridge to see what >> happens. >> >> Dennis Burgess - LinkTechs.net wrote: >> >> >>> A virtual AP is another interface, so unless its bridged with something >>> else, it will have to have an IP to communicate! >>> >>> * ----------------------------------------------------------- >>> Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer >>> WISPA Board Member - wispa.org <http://www.wispa.org/> >>> Link Technologies, Inc -- Mikrotik & WISP Support Services >>> WISPA Vendor Member* >>> *Office*: 314-735-0270 *Website*: http://www.linktechs.net >>> <http://www.linktechs.net/> >>> */ LIVE On-Line Mikrotik Training <http://www.onlinemikrotiktraining.com>/* >>> >>> The information transmitted (including attachments) is covered by the >>> Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended >>> only for the person(s) or entity/entities to which >>> it is addressed and may contain confidential and/or privileged material. >>> Any review, retransmission, dissemination or other use of, or taking of any >>> action in reliance upon, this information by persons or entities other than >>> the intended recipient(s) is prohibited, If you >>> received this in error, please contact the sender and delete the material >>> from any computer. >>> >>> >>> >>> >>> >>> Scott Reed wrote: >>> >>> >>> >>>> I have tried to setup OSPF on a Virtual AP in 2.9.49. I have not found >>>> a way to get it to forward the route. As soon as I put the address on >>>> the physical interface, the route propagates. Any one know if this can >>>> be made to work? >>>> >>>> If I upgrade to 3.23 or higher will it work? >>>> >>>> >>>> >>>> >>>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> ------------------------------------------------------------------------ >>> >>> >>> No virus found in this incoming message. >>> Checked by AVG - www.avg.com >>> Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date: 07/01/09 >>> 05:53:00 >>> >>> >>> >>> >> >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date: 07/01/09 > 05:53:00 > > -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
