It was all Dennis :)

On 7/1/09, Scott Reed <[email protected]> wrote:
> Maybe.  I will definitely try tomorrow at the site.
> I just tried on a wired interface that has nothing connected.  Rather
> interesting.  If the interface is enabled, it immediately propagates the
> route.  If it is disabled when the address is moved it does not
> propagate.  Leads me to believe when I associate to the VAP, it will
> make the route propagate.
> Thanks to both of you for the responses.
>
> Josh Luthman wrote:
>> If nothing was associated to the virtual AP then I'm thinking Dennis' idea
>> is right - it has no reason to propagate information to an interface that
>> is
>> "unplugged".
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> "When you have eliminated the impossible, that which remains, however
>> improbable, must be the truth."
>> --- Sir Arthur Conan Doyle
>>
>>
>> On Wed, Jul 1, 2009 at 7:00 PM, Scott Reed
>> <[email protected]>wrote:
>>
>>
>>> Nothing associated on the Virtual.
>>> The propagation was back out via the wire interface.
>>> I would not think it should matter if anything is connected.  The
>>> interface is active, it has an address.  That address range should be
>>> propagated by OSPF.  I will be at the site tomorrow.  I will connect to
>>> the VirtualAP and see if that matters.
>>>
>>>
>>> Dennis Burgess - LinkTechs.net wrote:
>>>
>>>> Is something connected to the VAP?  Why would it send if its on the
>>>> physical unless the other end is connected to the physical ap vs the
>>>> vap.
>>>>
>>>> * -----------------------------------------------------------
>>>> Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
>>>> WISPA Board Member - wispa.org <http://www.wispa.org/>
>>>> Link Technologies, Inc -- Mikrotik & WISP Support Services
>>>> WISPA Vendor Member*
>>>> *Office*: 314-735-0270 *Website*: http://www.linktechs.net
>>>> <http://www.linktechs.net/>
>>>> */ LIVE On-Line Mikrotik Training <http://www.onlinemikrotiktraining.com
>>>> /*
>>>>
>>>> The information transmitted (including attachments) is covered by the
>>>>
>>> Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended
>>> only
>>> for the person(s) or entity/entities to which
>>>
>>>> it is addressed and may contain confidential and/or privileged material.
>>>>
>>> Any review, retransmission, dissemination or other use of, or taking of
>>> any
>>> action in reliance upon, this information by persons or entities other
>>> than
>>> the intended recipient(s) is prohibited, If you
>>>
>>>> received this in error, please contact the sender and delete the
>>>> material
>>>>
>>> from any computer.
>>>
>>>>
>>>>
>>>>
>>>> Scott Reed wrote:
>>>>
>>>>
>>>>> Yep, that is what I said in the original post.
>>>>> Put the IP on the VirtualAP and no route prorogation.
>>>>> Put it on the physical and it propagates.  So the question is, why does
>>>>> the route not propagate from the VirtualAP?  And is that corrected in
>>>>>
>>> v3.x?
>>>
>>>>> I assumed the VirtualAP was just like any other interface, put maybe
>>>>>
>>> not.
>>>
>>>>> I may try putting it in a bridge and addressing the bridge to see what
>>>>> happens.
>>>>>
>>>>> Dennis Burgess - LinkTechs.net wrote:
>>>>>
>>>>>
>>>>>
>>>>>> A virtual AP is another interface, so unless its bridged with
>>>>>> something
>>>>>> else, it will have to have an IP to communicate!
>>>>>>
>>>>>> * -----------------------------------------------------------
>>>>>> Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
>>>>>> WISPA Board Member - wispa.org <http://www.wispa.org/>
>>>>>> Link Technologies, Inc -- Mikrotik & WISP Support Services
>>>>>> WISPA Vendor Member*
>>>>>> *Office*: 314-735-0270 *Website*: http://www.linktechs.net
>>>>>> <http://www.linktechs.net/>
>>>>>> */ LIVE On-Line Mikrotik Training <
>>>>>>
>>> http://www.onlinemikrotiktraining.com>/*
>>>
>>>>>> The information transmitted (including attachments) is covered by the
>>>>>>
>>> Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended
>>> only
>>> for the person(s) or entity/entities to which
>>>
>>>>>> it is addressed and may contain confidential and/or privileged
>>>>>>
>>> material. Any review, retransmission, dissemination or other use of, or
>>> taking of any action in reliance upon, this information by persons or
>>> entities other than the intended recipient(s) is prohibited, If you
>>>
>>>>>> received this in error, please contact the sender and delete the
>>>>>>
>>> material from any computer.
>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Scott Reed wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> I have tried to setup OSPF on a Virtual AP in 2.9.49.  I have not
>>>>>>>
>>> found
>>>
>>>>>>> a way to get it to forward the route.  As soon as I put the address
>>>>>>> on
>>>>>>> the physical interface, the route propagates.  Any one know if this
>>>>>>>
>>> can
>>>
>>>>>>> be made to work?
>>>>>>>
>>>>>>> If I upgrade to 3.23 or higher will it work?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>> --------------------------------------------------------------------------------
>>>
>>>>>> WISPA Wants You! Join today!
>>>>>> http://signup.wispa.org/
>>>>>>
>>>>>>
>>> --------------------------------------------------------------------------------
>>>
>>>>>> WISPA Wireless List: [email protected]
>>>>>>
>>>>>> Subscribe/Unsubscribe:
>>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>>
>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>>
>>>>>>
>>>>>>
>>> ------------------------------------------------------------------------
>>>
>>>>>> No virus found in this incoming message.
>>>>>> Checked by AVG - www.avg.com
>>>>>> Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date:
>>>>>>
>>> 07/01/09 05:53:00
>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>> --------------------------------------------------------------------------------
>>>
>>>> WISPA Wants You! Join today!
>>>> http://signup.wispa.org/
>>>>
>>>>
>>> --------------------------------------------------------------------------------
>>>
>>>> WISPA Wireless List: [email protected]
>>>>
>>>> Subscribe/Unsubscribe:
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> No virus found in this incoming message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date:
>>>> 07/01/09
>>>>
>>> 05:53:00
>>>
>>>>
>>> --
>>> Scott Reed
>>> Sr. Systems Engineer
>>> GAB Midwest
>>> 1-800-363-1544 x4000
>>> Cell: 260-273-7239
>>>
>>>
>>>
>>>
>>> --------------------------------------------------------------------------------
>>> WISPA Wants You! Join today!
>>> http://signup.wispa.org/
>>>
>>> --------------------------------------------------------------------------------
>>>
>>> WISPA Wireless List: [email protected]
>>>
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>
>>>
>>
>>
>> --------------------------------------------------------------------------------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------------
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date: 07/01/09
>> 05:53:00
>>
>>
>
> --
> Scott Reed
> Sr. Systems Engineer
> GAB Midwest
> 1-800-363-1544 x4000
> Cell: 260-273-7239
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


-- 
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

"When you have eliminated the impossible, that which remains, however
improbable, must be the truth."
--- Sir Arthur Conan Doyle


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to