Maybe. I will definitely try tomorrow at the site. I just tried on a wired interface that has nothing connected. Rather interesting. If the interface is enabled, it immediately propagates the route. If it is disabled when the address is moved it does not propagate. Leads me to believe when I associate to the VAP, it will make the route propagate. Thanks to both of you for the responses.
Josh Luthman wrote: > If nothing was associated to the virtual AP then I'm thinking Dennis' idea > is right - it has no reason to propagate information to an interface that is > "unplugged". > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > "When you have eliminated the impossible, that which remains, however > improbable, must be the truth." > --- Sir Arthur Conan Doyle > > > On Wed, Jul 1, 2009 at 7:00 PM, Scott Reed <[email protected]>wrote: > > >> Nothing associated on the Virtual. >> The propagation was back out via the wire interface. >> I would not think it should matter if anything is connected. The >> interface is active, it has an address. That address range should be >> propagated by OSPF. I will be at the site tomorrow. I will connect to >> the VirtualAP and see if that matters. >> >> >> Dennis Burgess - LinkTechs.net wrote: >> >>> Is something connected to the VAP? Why would it send if its on the >>> physical unless the other end is connected to the physical ap vs the vap. >>> >>> * ----------------------------------------------------------- >>> Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer >>> WISPA Board Member - wispa.org <http://www.wispa.org/> >>> Link Technologies, Inc -- Mikrotik & WISP Support Services >>> WISPA Vendor Member* >>> *Office*: 314-735-0270 *Website*: http://www.linktechs.net >>> <http://www.linktechs.net/> >>> */ LIVE On-Line Mikrotik Training <http://www.onlinemikrotiktraining.com >>> /* >>> >>> The information transmitted (including attachments) is covered by the >>> >> Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended only >> for the person(s) or entity/entities to which >> >>> it is addressed and may contain confidential and/or privileged material. >>> >> Any review, retransmission, dissemination or other use of, or taking of any >> action in reliance upon, this information by persons or entities other than >> the intended recipient(s) is prohibited, If you >> >>> received this in error, please contact the sender and delete the material >>> >> from any computer. >> >>> >>> >>> >>> Scott Reed wrote: >>> >>> >>>> Yep, that is what I said in the original post. >>>> Put the IP on the VirtualAP and no route prorogation. >>>> Put it on the physical and it propagates. So the question is, why does >>>> the route not propagate from the VirtualAP? And is that corrected in >>>> >> v3.x? >> >>>> I assumed the VirtualAP was just like any other interface, put maybe >>>> >> not. >> >>>> I may try putting it in a bridge and addressing the bridge to see what >>>> happens. >>>> >>>> Dennis Burgess - LinkTechs.net wrote: >>>> >>>> >>>> >>>>> A virtual AP is another interface, so unless its bridged with something >>>>> else, it will have to have an IP to communicate! >>>>> >>>>> * ----------------------------------------------------------- >>>>> Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer >>>>> WISPA Board Member - wispa.org <http://www.wispa.org/> >>>>> Link Technologies, Inc -- Mikrotik & WISP Support Services >>>>> WISPA Vendor Member* >>>>> *Office*: 314-735-0270 *Website*: http://www.linktechs.net >>>>> <http://www.linktechs.net/> >>>>> */ LIVE On-Line Mikrotik Training < >>>>> >> http://www.onlinemikrotiktraining.com>/* >> >>>>> The information transmitted (including attachments) is covered by the >>>>> >> Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended only >> for the person(s) or entity/entities to which >> >>>>> it is addressed and may contain confidential and/or privileged >>>>> >> material. Any review, retransmission, dissemination or other use of, or >> taking of any action in reliance upon, this information by persons or >> entities other than the intended recipient(s) is prohibited, If you >> >>>>> received this in error, please contact the sender and delete the >>>>> >> material from any computer. >> >>>>> >>>>> >>>>> >>>>> Scott Reed wrote: >>>>> >>>>> >>>>> >>>>> >>>>>> I have tried to setup OSPF on a Virtual AP in 2.9.49. I have not >>>>>> >> found >> >>>>>> a way to get it to forward the route. As soon as I put the address on >>>>>> the physical interface, the route propagates. Any one know if this >>>>>> >> can >> >>>>>> be made to work? >>>>>> >>>>>> If I upgrade to 3.23 or higher will it work? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >> -------------------------------------------------------------------------------- >> >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>>> >> -------------------------------------------------------------------------------- >> >>>>> WISPA Wireless List: [email protected] >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> >>>>> >> ------------------------------------------------------------------------ >> >>>>> No virus found in this incoming message. >>>>> Checked by AVG - www.avg.com >>>>> Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date: >>>>> >> 07/01/09 05:53:00 >> >>>>> >>>>> >>>>> >>>> >>> >>> >> -------------------------------------------------------------------------------- >> >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >> -------------------------------------------------------------------------------- >> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> ------------------------------------------------------------------------ >>> >>> >>> No virus found in this incoming message. >>> Checked by AVG - www.avg.com >>> Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date: 07/01/09 >>> >> 05:53:00 >> >>> >> -- >> Scott Reed >> Sr. Systems Engineer >> GAB Midwest >> 1-800-363-1544 x4000 >> Cell: 260-273-7239 >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date: 07/01/09 > 05:53:00 > > -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
