Reproach saw. Same thing with all thread but make sure you put the bolts on before doing the cut.
/Eje Sent via BlackBerry from T-Mobile -----Original Message----- From: AJ <aj.grant...@gmail.com> Date: Thu, 27 Aug 2009 14:53:15 To: WISPA General List<wireless@wispa.org> Subject: Re: [WISPA] Antenna Mount extensions What are you guys using to cut Unistrut? I love using it for side mounts on towers but most of those were precut to length before I arrived at the work site... On Thu, Aug 27, 2009 at 2:42 PM, Eje Gustafsson <e...@wisp-router.com> wrote: > Careful with those. You tighten up to hard or you attach to an old chimney > and you might find yourself with a big mason bill and maybe even a > carpenter > bill as well. > > / Eje > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of ralph > Sent: Thursday, August 27, 2009 3:26 PM > To: 'WISPA General List' > Subject: Re: [WISPA] Antenna Mount extensions > > This is a weird looking animal! A chimney mount for a dish with 5 straps. > http://www.ronard.com/4424.html > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Randy Cosby > Sent: Thursday, August 27, 2009 12:51 PM > To: WISPA General List > Subject: Re: [WISPA] Antenna Mount extensions > > http://www.ronard.com/730731.html > > A bit more expensive / sturdy / configurable... > > Probably overkill. > > Ronard makes really good stuff. > > > Robert West wrote: > > [IMG]http://i28.tinypic.com/fnsxl.jpg[/IMG] > > > > Another crude rendering. > > > > The bottom is where he mounts the pipe to the side of the house. Then it > > goes up and the bend allows it to go out and up over the eave and then > back > > into over the roof. If the bend is too far out, they swing the assembly > in > > towards the eave and mount to that as well. > > > > He said he has the muffler shop bend it just like regular muffler pipe, > the > > alloy is similar as in it's pretty soft and easy to bend. So it does a > 90 > > degree, then up and a 90 degree back and up again. Looked darned simple > and > > he buys the EMT for 13 bucks and pays the muffler guy something like 20 > > bucks to do 10 or 20 of them. > > > > > > > > -----Original Message----- > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > > Behalf Of Josh Luthman > > Sent: Thursday, August 27, 2009 12:06 PM > > To: WISPA General List > > Subject: Re: [WISPA] Antenna Mount extensions > > > > I think the bottom horizontal line is the base of the standard powmount - > > but the top horizontal line is where I am confused. You said the muffler > > shop bends it, does it make a shift like a traditional muffler? 90 turn? > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > "When you have eliminated the impossible, that which remains, however > > improbable, must be the truth." > > --- Sir Arthur Conan Doyle > > > > > > On Thu, Aug 27, 2009 at 12:03 PM, Robert West > > <robert.w...@just-micro.com>wrote: > > > > > >> No, it's like this crude ASCII rendering. > >> He puts a U clamp on the bottom and on the eave. > >> > >> I > >> I > >> I > >> I > >> I > >> I > >> I > >> ------I > >> I > >> I > >> I > >> ------- > >> I > >> I > >> I > >> I > >> > >> -----Original Message----- > >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > >> Behalf Of Josh Luthman > >> Sent: Thursday, August 27, 2009 11:38 AM > >> To: WISPA General List > >> Subject: Re: [WISPA] Antenna Mount extensions > >> > >> Robert, > >> > >> Your competitor's U shaped EMT - does it look like my painting? > >> > >> http://i27.tinypic.com/30woz1k.jpg > >> > >> Note - IANAA (I am not an artist) > >> > >> Josh Luthman > >> Office: 937-552-2340 > >> Direct: 937-552-2343 > >> 1100 Wayne St > >> Suite 1337 > >> Troy, OH 45373 > >> > >> "When you have eliminated the impossible, that which remains, however > >> improbable, must be the truth." > >> --- Sir Arthur Conan Doyle > >> > >> > >> On Thu, Aug 27, 2009 at 11:27 AM, Robert West > >> <robert.w...@just-micro.com>wrote: > >> > >> > >>> My competitor here uses 1.25" EMT conduit from Home Depot, 13 bucks for > >>> > > a > > > >>> 10' section. He takes them to the local muffler shop and has them bend > >>> them > >>> with a block U shape so that he can mount them to the side of the house > >>> under the peak and the bend allows him to swing the mount to the eave > as > >>> well for stability. For additional height he inserts the next smaller > >>> > >> size > >> > >>> of EMT 1 to 2 feet inside the 1.25" and puts a couple of 1/4" bolts to > >>> attach them together. He can add another 8 or 9 feet this way. BUT, > >>> > > EMT > > > >>> is > >>> a soft allow, it's made to bend easily so I certainly wouldn't want to > >>> trust > >>> it with anything with a large wind load very high up. > >>> > >>> I haven't tried it but he says it works perfect for him and his guys > >>> install > >>> a lot faster now. > >>> > >>> Bob- > >>> > >>> -----Original Message----- > >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] > On > >>> Behalf Of Michael Baird > >>> Sent: Thursday, August 27, 2009 10:49 AM > >>> To: WISPA General List > >>> Subject: [WISPA] Antenna Mount extensions > >>> > >>> As we get into more and more installs, we are discovering installations > >>> where we just need a little more height, 5-10 ft. or so. Currently the > >>> majority of our installs are roof mount via a dish type screw in mount, > >>> or antenna tower mount. I'm looking for suggestions on additional > >>> mounting options, specifically we would like to be able to extend off > >>> the roof another 5-20ft if possible with some sort of simple/economical > >>> extension that will remain stable into the future. > >>> > >>> Regards > >>> Michael Baird > >>> > >>> > >>> > >>> > >>> > >> > > > > ---------------------------------------------------------------------------- > > > >>> ---- > >>> WISPA Wants You! Join today! > >>> http://signup.wispa.org/ > >>> > >>> > >>> > >> > > > > ---------------------------------------------------------------------------- > > > >>> ---- > >>> > >>> WISPA Wireless List: wireless@wispa.org > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >>> > >>> > >>> > >>> > >>> > >> > > > > ---------------------------------------------------------------------------- > > > >> ---- > >> > >>> WISPA Wants You! Join today! > >>> http://signup.wispa.org/ > >>> > >>> > >>> > >> > > > > ---------------------------------------------------------------------------- > > > >> ---- > >> > >>> WISPA Wireless List: wireless@wispa.org > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >>> > >> > >> > >> > > > > ---------------------------------------------------------------------------- > > > >> ---- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > >> > > > > ---------------------------------------------------------------------------- > > > >> ---- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > >> > >> > >> > >> > >> > > > > ---------------------------------------------------------------------------- > > ---- > > > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > >> > > > > ---------------------------------------------------------------------------- > > ---- > > > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > >> > > > > > > > > ---------------------------------------------------------------------------- > > ---- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > ---------------------------------------------------------------------------- > > ---- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > ---------------------------------------------------------------------------- > ---- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > ---------------------------------------------------------------------------- > ---- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/