If you are not using a CMM, the sync source you are using may be providing sync at a different phase (timing) than the standard cmm.
Marco On Thu, Sep 24, 2009 at 8:14 PM, Eje Gustafsson <[email protected]> wrote: > As some of you know we replaced a Canopy AP. The old one was GPS synced by a > CMM but what I didn't know when we replaced the CMM sync port was gone (we > share tower with another Canopy operator that gave us sync since we only had > one unit up there and he didn't need the port). > > > > So instead of getting with the other WISP to find out how and when we could > get sync again we installed a syncpipe parasitic (we didn't have any at the > point ourselves when the other WISP told we could plug in to his CMM). > > > > Canopy unit gets GPS sync nicely and we see 10 out of 12 sats, coordinates > looks right etc. > > > > But when we turn on the AP to use gps sync from timing port only 2 subs > associate. If we change frequency a different 2 subs associate. If we change > to another frequency yet another different set of 2 subs associate. Plus > they take a good 20-30 before they associate. > > But no matter what I do only 2 will associate as long gps sync from timing > port is set. If we set it to generate sync plop all subs come back almost > immediately once the AP rebooted. > > > > We are running v9.4, on this 2.4Ghz non-advantage (all subs are also 9.4) AP > (wish Moto would hurry up get us our upgrade). > > > > We are running same distance, control slots and % as the other 2 canopy > operators in the area. . > > > > Any ideas to find a solution that means I do not have to climb 180ft a third > day in a row appreciated.. And no do not have a second sync pipe on hand it > was our spare unit we installed. The other unit we got at the same time > works very nicely on a 900Mhz AP on a different tower. > > > > / Eje > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Marco C. Coelho Argon Technologies Inc. POB 875 Greenville, TX 75403-0875 903-455-5036 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
