Cloaking is set to 1x. VDS is off. BTW: Both ends are not exactly the same: The remote (station) is running StarOS v2, the local (AP) is running v3. As I mentioned though, I have another client on it which is also running v2 with no issues. I also have a 3rd client (me) running a NS5. -RickG
On Wed, Sep 30, 2009 at 7:39 PM, Rick Harnish <[email protected]> wrote: > Rick, > > Is the cloaking rate set the same on both? How about vds? Could be vds is > set up on one but not the other. > > Rick Harnish > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Butch Evans > Sent: Wednesday, September 30, 2009 3:24 PM > To: WISPA General List > Subject: Re: [WISPA] StarOS Backhaul wont connect??? > > On Wed, 2009-09-30 at 12:53 -0400, RickG wrote: >> 2) I've tried several freqs. Either way, both ends are the same >> equipment so there shoudl not be a problem. I am familiar with >> Mikrotik and there is no scan list in StarOS that I am aware of. > > Both ends being the same is not the issue. It is the Atheros driver. > With that standard driver, the AP may be able to tune to a channel that > is not available as a "standard scan" channel on which to locate an AP. > For example, with most of the Atheros cards, you can set up an AP on: > 5180, 5185, 5200, etc. However, the standard Atheros driver will not be > able to locate an AP that is running at 5185 because that is not a > "standard channel". A client CAN be configured to connect at that > channel, but you would have to supply the driver with a list of channels > to "scan" for the AP. I'm not familiar enough with StarOS to know if > that is an option OR if StarOS is even using the standard driver. If > so, it is something to consider. > >> Your 4th idea of swapping is a good idea. I have other customers >> connected to the AP so its a bit touchy but I will give that a shot >> soon. > > This is, I think, the best option. It is likely to be the most > definitive test. > > -- > ******************************************************************** > * Butch Evans * Professional Network Consultation* > * http://www.butchevans.com/ * Network Engineering * > * http://www.wispa.org/ * Wired or Wireless Networks * > * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * > ******************************************************************** > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.409 / Virus Database: 270.13.115/2404 - Release Date: 09/30/09 > 05:52:00 > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
