If you tack-solder a 25k resistor between 4/5 and 7/8, your passive device should work.
Tom S. ----- Original Message ----- From: "rwf" <ralphli...@bsrg.org> To: "'WISPA General List'" <wireless@wispa.org> Sent: Wednesday, November 25, 2009 10:19 AM Subject: [WISPA] 802.3af POE to Passive POE > Anyone know of a gizmo that will allow a 12-15VDC device that is normally > powered by "passive poe" (Pins 4/5 and 7/8 like UBNT and many of the > others > use) to be run from a port on a POE Ethernet switch (802.3af) > > Please tell me about it if you do. > > Thanks > > Ralph > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/