RJ45-ECS = pac wireless pass thru connectors http://images.google.com/images?q=rj45-ecs&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&sa=N&hl=en&tab=wi
It's a female rj45 connect outside (so you plug your outdoor cable into it, then through the house to a POE) and a patch cable you plug into the rb411. Steep at $10 some places but even then it's well worth it. There is a 19 or 20 dbi 5ghz panel for ARC enclosures. I have always used the 23dbi panel. Remember the ARC stuff is antenna+enclosure - it all ties together so when you get to the customer site all you do is mount it and run the cat5. If you hate using something to remove the cable (which you shouldn't need to do often at all, I don't I personally ever have had to from these units) you will NEED the rj45-ecs. You can remove the cable if you have tiny fingers and can roll your fingertip from the side of the clip. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "The secret to creativity is knowing how to hide your sources." --- Albert Einstein On Fri, Jan 8, 2010 at 2:41 PM, Marlon K. Schafer <o...@odessaoffice.com>wrote: > Thanks Chuck. > > What's an RJ45-ECS? > > What's the warrantee on these units? > > Are there other antenna size choices? > > I really like the Pac Wireless pass through connectors. I hate having to > take a screw driver up with me much to depress the tab on an ethernet > connection! > > laters, > marlon > > ----- Original Message ----- > From: "Chuck Hogg" <ch...@shelbybb.com> > To: "WISPA General List" <wireless@wispa.org> > Sent: Friday, January 08, 2010 10:44 AM > Subject: Re: [WISPA] MT Mikropoynt > > > > Normally, We do the RJ45-ECS. Some customers prefer it the other way, > > and a build may have been done without. I agree they are a pain, I > > prefer with RJ45-ECS as well. Make sure you have your account setup for > > WISPA (Coupon Code: FREEBUILD), and you get the builds done for free on > > these kits. If you have any special requests for QLW, just put them in > > the notes section of your order and we will make it happen. > > > > Regards, > > Chuck Hogg > > Shelby Broadband > > 502-722-9292 > > ch...@shelbybb.com > > http://www.shelbybb.com > > > > > > -----Original Message----- > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > > Behalf Of Josh Luthman > > Sent: Friday, January 08, 2010 1:31 PM > > To: WISPA General List > > Subject: Re: [WISPA] MT Mikropoynt > > > > How about both good price and well built? Order 5+ and you save $50+. > > > > http://quicklinkwireless.com/Customkititems.asp?kc=KIT-58-23A-R52&eq= > > > > I personally have them deliver the parts. I have someone at the office > > build them and test them (they charge 7/unit and my guy can do 2.5 > > builds/hr). > > > > Some of them they did build as I made a mistake on ordering. They do > > not > > use the rj45-ecs but rather put the 411 up to the connectivity hole, > > though > > if you ask I expect they will. I absolute can NOT STAND THAT. You can > > see > > the link lights, but it is a absolute bear to plug it in (or it was on a > > grain leg and water tower Saturday before last in the cold windy snow). > > > > I love the mounting system. Their only flaw is they are a bit weighty > > which > > can be tiring. I have had nothing but success with these antennas. I > > made > > be flogged for saying this, but my experience has been better with these > > then Motorola 5700s (on a different tower). > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > "The secret to creativity is knowing how to hide your sources." > > --- Albert Einstein > > > > > > On Fri, Jan 8, 2010 at 1:21 PM, Marlon K. Schafer > > <o...@odessaoffice.com>wrote: > > > >> Hi All, > >> > >> I've been seeing way to high of a failure rate or dead out of the box > >> problem with these radios. I'm using the 411 versions. > >> > >> One even had an antenna that wasn't connected inside, broken solder > > joint. > >> > >> Anyone else seeing such high failure rates? It's got to be close to > > 20 or > >> 25% here. > >> > >> Anyone know of a nice pre-built kit that I can use instead? Price is > > NOT > >> the top priority here. I'm just using these 5.8 gig versions in > > places > >> that > >> the 2.4 is maxed out or for higher end business customers. > >> > >> thanks, > >> marlon > >> > >> > >> > >> > >> > > ------------------------------------------------------------------------ > > -------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > > ------------------------------------------------------------------------ > > -------- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > > > > > > ------------------------------------------------------------------------ > > -------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > ------------------------------------------------------------------------ > > -------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
