That's a VERY high indicator of multipath. This is only a guess, but I'd say that you probably run many of these links at -50 or more signal levels. -60 for sure.
If you DROP your signals to -70 to -75 you'll often find them working even better. marlon ----- Original Message ----- From: "RickG" <[email protected]> To: "WISPA General List" <[email protected]> Sent: Monday, February 01, 2010 5:08 PM Subject: [WISPA] power > OK, I need a little input. I've got several "poor mans repeaters" around > by > using a pair of bullets, one for backhaul and the other for the AP. Today, > I > installed a Bullet on a new customer that was a stones throw away from the > AP. At full power, he got just under 1Mbps. Turning down the power, he got > 3Mbps+. Is turning down the power on the CPE side on a test and trial > basis > or is there some kind of method to it? > -RickG > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
