What I've found during the import step is for some of the fields if there's an existing entry with the same name they conflict and the import ends with an error. If the names don't conflict you end up with the old and imported config items. It's best to have the unit as clean as possible before trying to import.
Thanks again! I think I'm all done with the config. Tomorrow I'll take it to the site and give it a shot. Greg On Mar 2, 2010, at 10:31 PM, Josh Luthman wrote: > You can do /export for everything. Obviously you can pick and choose > what to save. > > On 3/2/10, Greg Ihnen <[email protected]> wrote: >> Could I just export Interface,and all of IP, and all of Queue? That way it >> would be just three files and it would have all my config. Is there anything >> in the exports which is MAC address specific (specific to the x86 hardware) >> that won't work in the RB750? >> >> Thanks! >> Greg >> >> On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote: >> >>> Greg, >>> >>> Yes there is >>> >>> /ip address export file=ipaddr86 >>> /ip route export file=iprout86 >>> >>> Then... >>> >>> /import file=iproute86.rsc >>> /import file=ipaddr86.rsc >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> “Success is not final, failure is not fatal: it is the courage to continue >>> that counts.” >>> --- Winston Churchill >>> >>> >>> On Tue, Mar 2, 2010 at 8:50 PM, Greg Ihnen <[email protected]> wrote: >>> >>>> Thanks. No, I didn't have the right default route to the outside world. >>>> >>>> The problem is definitely connected with routes. Thanks for pointing me >>>> there. I have another router (x86) set up here and I took a look at the >>>> routes there and I could see what was missing. It was the route with a >>>> destination address of 0.0.0.0/0 and a gateway of 201.222.12.53 (the >>>> modem) with a distance of 1, scope of 30 and target scope of 10. With >>>> that >>>> one static route in it populates other dynamic discovered routes and it >>>> all >>>> works. >>>> >>>> But there's a complication too and that is if I reset the RB750 and then >>>> configure it and get the routes right it works as I said above. But if I >>>> take a more complicated setup I had configured and backed up and load >>>> that >>>> and then set everything right (including the routes) it still won't work! >>>> The backup was made under 4.3 and the unit is now running 4.5. I don't >>>> know >>>> if that could be it. Anyway, it seems like I can make it work, I just >>>> have >>>> to go through all the trouble of configuring it all again. >>>> >>>> What a pain there's no way to take an x86 config and load it on an RB750. >>>> >>>> Thanks to all who replied. >>>> >>>> Greg >>>> >>>> On Mar 2, 2010, at 7:22 PM, Scott Reed wrote: >>>> >>>>> Did you set the correct default route on the 750? >>>>> >>>>> Greg Ihnen wrote: >>>>>> I have an RB750 which I'm trying to install. It's not my first. The >>>> modem is not acting as a DHCP server so I have to config the WAN port >>>> (Eth1 >>>> Gateway) manually. When I've configured the modem (using NAT) I can't >>>> access >>>> or ping the internet. I can ping the modem. So pings get to the modem but >>>> not ip address of servers I know on the internet. Anyone have any idea >>>> what >>>> this could be? I even downloaded a config from a working RB750 I have at >>>> another location, edited the config so it was no longer using DHCP on >>>> Eth1, >>>> manually configured Eth1, and nothing. Again I can ping the modem but >>>> nothing beyond it. >>>>>> >>>>>> Thanks in advance. >>>>>> >>>>>> Greg >>>>>> >>>>>> >>>>>> >>>> -------------------------------------------------------------------------------- >>>>>> WISPA Wants You! Join today! >>>>>> http://signup.wispa.org/ >>>>>> >>>> -------------------------------------------------------------------------------- >>>>>> >>>>>> WISPA Wireless List: [email protected] >>>>>> >>>>>> Subscribe/Unsubscribe: >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>> >>>>>> >>>>>> >>>>> >>>>> -- >>>>> Scott Reed >>>>> Sr. Systems Engineer >>>>> GAB Midwest >>>>> 1-800-363-1544 x4000 >>>>> Cell: 260-273-7239 >>>>> >>>>> >>>>> >>>>> >>>> -------------------------------------------------------------------------------- >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>> -------------------------------------------------------------------------------- >>>>> >>>>> WISPA Wireless List: [email protected] >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: [email protected] >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -- > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > “Success is not final, failure is not fatal: it is the courage to > continue that counts.” > --- Winston Churchill > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
