Is there anyway to revert to the old MAC address? Greg
On Mar 2, 2010, at 10:42 PM, Josh Luthman wrote: > And it will drive you nuts. Especially if you use it to template and > get multiple CPEs with the same MAC on one AP. Augh... > > On 3/2/10, Scott Reed <[email protected]> wrote: >> Be careful with exporting interfaces. It takes the MAC address and sets >> it on the new device. You can just delete the MAC=xx:xx:xx:xx:xx:xx in >> WordPad, save the file and then import it. >> >> Greg Ihnen wrote: >>> Could I just export Interface,and all of IP, and all of Queue? That way it >>> would be just three files and it would have all my config. Is there >>> anything in the exports which is MAC address specific (specific to the x86 >>> hardware) that won't work in the RB750? >>> >>> Thanks! >>> Greg >>> >>> On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote: >>> >>> >>>> Greg, >>>> >>>> Yes there is >>>> >>>> /ip address export file=ipaddr86 >>>> /ip route export file=iprout86 >>>> >>>> Then... >>>> >>>> /import file=iproute86.rsc >>>> /import file=ipaddr86.rsc >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> “Success is not final, failure is not fatal: it is the courage to >>>> continue >>>> that counts.” >>>> --- Winston Churchill >>>> >>>> >>>> On Tue, Mar 2, 2010 at 8:50 PM, Greg Ihnen <[email protected]> wrote: >>>> >>>> >>>>> Thanks. No, I didn't have the right default route to the outside world. >>>>> >>>>> The problem is definitely connected with routes. Thanks for pointing me >>>>> there. I have another router (x86) set up here and I took a look at the >>>>> routes there and I could see what was missing. It was the route with a >>>>> destination address of 0.0.0.0/0 and a gateway of 201.222.12.53 (the >>>>> modem) with a distance of 1, scope of 30 and target scope of 10. With >>>>> that >>>>> one static route in it populates other dynamic discovered routes and it >>>>> all >>>>> works. >>>>> >>>>> But there's a complication too and that is if I reset the RB750 and then >>>>> configure it and get the routes right it works as I said above. But if I >>>>> take a more complicated setup I had configured and backed up and load >>>>> that >>>>> and then set everything right (including the routes) it still won't >>>>> work! >>>>> The backup was made under 4.3 and the unit is now running 4.5. I don't >>>>> know >>>>> if that could be it. Anyway, it seems like I can make it work, I just >>>>> have >>>>> to go through all the trouble of configuring it all again. >>>>> >>>>> What a pain there's no way to take an x86 config and load it on an >>>>> RB750. >>>>> >>>>> Thanks to all who replied. >>>>> >>>>> Greg >>>>> >>>>> On Mar 2, 2010, at 7:22 PM, Scott Reed wrote: >>>>> >>>>> >>>>>> Did you set the correct default route on the 750? >>>>>> >>>>>> Greg Ihnen wrote: >>>>>> >>>>>>> I have an RB750 which I'm trying to install. It's not my first. The >>>>>>> >>>>> modem is not acting as a DHCP server so I have to config the WAN port >>>>> (Eth1 >>>>> Gateway) manually. When I've configured the modem (using NAT) I can't >>>>> access >>>>> or ping the internet. I can ping the modem. So pings get to the modem >>>>> but >>>>> not ip address of servers I know on the internet. Anyone have any idea >>>>> what >>>>> this could be? I even downloaded a config from a working RB750 I have at >>>>> another location, edited the config so it was no longer using DHCP on >>>>> Eth1, >>>>> manually configured Eth1, and nothing. Again I can ping the modem but >>>>> nothing beyond it. >>>>> >>>>>>> Thanks in advance. >>>>>>> >>>>>>> Greg >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>> -------------------------------------------------------------------------------- >>>>> >>>>>>> WISPA Wants You! Join today! >>>>>>> http://signup.wispa.org/ >>>>>>> >>>>>>> >>>>> -------------------------------------------------------------------------------- >>>>> >>>>>>> WISPA Wireless List: [email protected] >>>>>>> >>>>>>> Subscribe/Unsubscribe: >>>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>>> >>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> -- >>>>>> Scott Reed >>>>>> Sr. Systems Engineer >>>>>> GAB Midwest >>>>>> 1-800-363-1544 x4000 >>>>>> Cell: 260-273-7239 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> -------------------------------------------------------------------------------- >>>>> >>>>>> WISPA Wants You! Join today! >>>>>> http://signup.wispa.org/ >>>>>> >>>>>> >>>>> -------------------------------------------------------------------------------- >>>>> >>>>>> WISPA Wireless List: [email protected] >>>>>> >>>>>> Subscribe/Unsubscribe: >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>> >>>>> >>>>> >>>>> -------------------------------------------------------------------------------- >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>>> -------------------------------------------------------------------------------- >>>>> >>>>> WISPA Wireless List: [email protected] >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: [email protected] >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> >> >> -- >> Scott Reed >> Sr. Systems Engineer >> GAB Midwest >> 1-800-363-1544 x4000 >> Cell: 260-273-7239 >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -- > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > “Success is not final, failure is not fatal: it is the courage to > continue that counts.” > --- Winston Churchill > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
