export to file edit the file and change the MAC to the original import from file
On Tue, Mar 2, 2010 at 9:37 PM, Josh Luthman <[email protected]> wrote: > I've never had to figure it out but I've asked myself the same > question many times. > > Maybe someone can figure it out or answer? > > On 3/2/10, Greg Ihnen <[email protected]> wrote: >> Is there anyway to revert to the old MAC address? >> >> Greg >> >> On Mar 2, 2010, at 10:42 PM, Josh Luthman wrote: >> >>> And it will drive you nuts. Especially if you use it to template and >>> get multiple CPEs with the same MAC on one AP. Augh... >>> >>> On 3/2/10, Scott Reed <[email protected]> wrote: >>>> Be careful with exporting interfaces. It takes the MAC address and sets >>>> it on the new device. You can just delete the MAC=xx:xx:xx:xx:xx:xx in >>>> WordPad, save the file and then import it. >>>> >>>> Greg Ihnen wrote: >>>>> Could I just export Interface,and all of IP, and all of Queue? That way >>>>> it >>>>> would be just three files and it would have all my config. Is there >>>>> anything in the exports which is MAC address specific (specific to the >>>>> x86 >>>>> hardware) that won't work in the RB750? >>>>> >>>>> Thanks! >>>>> Greg >>>>> >>>>> On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote: >>>>> >>>>> >>>>>> Greg, >>>>>> >>>>>> Yes there is >>>>>> >>>>>> /ip address export file=ipaddr86 >>>>>> /ip route export file=iprout86 >>>>>> >>>>>> Then... >>>>>> >>>>>> /import file=iproute86.rsc >>>>>> /import file=ipaddr86.rsc >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> “Success is not final, failure is not fatal: it is the courage to >>>>>> continue >>>>>> that counts.” >>>>>> --- Winston Churchill >>>>>> >>>>>> >>>>>> On Tue, Mar 2, 2010 at 8:50 PM, Greg Ihnen <[email protected]> wrote: >>>>>> >>>>>> >>>>>>> Thanks. No, I didn't have the right default route to the outside >>>>>>> world. >>>>>>> >>>>>>> The problem is definitely connected with routes. Thanks for pointing >>>>>>> me >>>>>>> there. I have another router (x86) set up here and I took a look at >>>>>>> the >>>>>>> routes there and I could see what was missing. It was the route with a >>>>>>> destination address of 0.0.0.0/0 and a gateway of 201.222.12.53 (the >>>>>>> modem) with a distance of 1, scope of 30 and target scope of 10. With >>>>>>> that >>>>>>> one static route in it populates other dynamic discovered routes and >>>>>>> it >>>>>>> all >>>>>>> works. >>>>>>> >>>>>>> But there's a complication too and that is if I reset the RB750 and >>>>>>> then >>>>>>> configure it and get the routes right it works as I said above. But if >>>>>>> I >>>>>>> take a more complicated setup I had configured and backed up and load >>>>>>> that >>>>>>> and then set everything right (including the routes) it still won't >>>>>>> work! >>>>>>> The backup was made under 4.3 and the unit is now running 4.5. I don't >>>>>>> know >>>>>>> if that could be it. Anyway, it seems like I can make it work, I just >>>>>>> have >>>>>>> to go through all the trouble of configuring it all again. >>>>>>> >>>>>>> What a pain there's no way to take an x86 config and load it on an >>>>>>> RB750. >>>>>>> >>>>>>> Thanks to all who replied. >>>>>>> >>>>>>> Greg >>>>>>> >>>>>>> On Mar 2, 2010, at 7:22 PM, Scott Reed wrote: >>>>>>> >>>>>>> >>>>>>>> Did you set the correct default route on the 750? >>>>>>>> >>>>>>>> Greg Ihnen wrote: >>>>>>>> >>>>>>>>> I have an RB750 which I'm trying to install. It's not my first. The >>>>>>>>> >>>>>>> modem is not acting as a DHCP server so I have to config the WAN port >>>>>>> (Eth1 >>>>>>> Gateway) manually. When I've configured the modem (using NAT) I can't >>>>>>> access >>>>>>> or ping the internet. I can ping the modem. So pings get to the modem >>>>>>> but >>>>>>> not ip address of servers I know on the internet. Anyone have any idea >>>>>>> what >>>>>>> this could be? I even downloaded a config from a working RB750 I have >>>>>>> at >>>>>>> another location, edited the config so it was no longer using DHCP on >>>>>>> Eth1, >>>>>>> manually configured Eth1, and nothing. Again I can ping the modem but >>>>>>> nothing beyond it. >>>>>>> >>>>>>>>> Thanks in advance. >>>>>>>>> >>>>>>>>> Greg >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>> -------------------------------------------------------------------------------- >>>>>>> >>>>>>>>> WISPA Wants You! Join today! >>>>>>>>> http://signup.wispa.org/ >>>>>>>>> >>>>>>>>> >>>>>>> -------------------------------------------------------------------------------- >>>>>>> >>>>>>>>> WISPA Wireless List: [email protected] >>>>>>>>> >>>>>>>>> Subscribe/Unsubscribe: >>>>>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>>>>> >>>>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> -- >>>>>>>> Scott Reed >>>>>>>> Sr. Systems Engineer >>>>>>>> GAB Midwest >>>>>>>> 1-800-363-1544 x4000 >>>>>>>> Cell: 260-273-7239 >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> -------------------------------------------------------------------------------- >>>>>>> >>>>>>>> WISPA Wants You! Join today! >>>>>>>> http://signup.wispa.org/ >>>>>>>> >>>>>>>> >>>>>>> -------------------------------------------------------------------------------- >>>>>>> >>>>>>>> WISPA Wireless List: [email protected] >>>>>>>> >>>>>>>> Subscribe/Unsubscribe: >>>>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>>>> >>>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -------------------------------------------------------------------------------- >>>>>>> WISPA Wants You! Join today! >>>>>>> http://signup.wispa.org/ >>>>>>> >>>>>>> -------------------------------------------------------------------------------- >>>>>>> >>>>>>> WISPA Wireless List: [email protected] >>>>>>> >>>>>>> Subscribe/Unsubscribe: >>>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>>> >>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>>> >>>>>>> >>>>>> -------------------------------------------------------------------------------- >>>>>> WISPA Wants You! Join today! >>>>>> http://signup.wispa.org/ >>>>>> -------------------------------------------------------------------------------- >>>>>> >>>>>> WISPA Wireless List: [email protected] >>>>>> >>>>>> Subscribe/Unsubscribe: >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>> >>>>> >>>>> >>>>> >>>>> -------------------------------------------------------------------------------- >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> -------------------------------------------------------------------------------- >>>>> >>>>> WISPA Wireless List: [email protected] >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> >>>>> >>>>> >>>> >>>> -- >>>> Scott Reed >>>> Sr. Systems Engineer >>>> GAB Midwest >>>> 1-800-363-1544 x4000 >>>> Cell: 260-273-7239 >>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: [email protected] >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> -- >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> “Success is not final, failure is not fatal: it is the courage to >>> continue that counts.” >>> --- Winston Churchill >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -- > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > “Success is not final, failure is not fatal: it is the courage to > continue that counts.” > --- Winston Churchill > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
