We purchased a WISP and are doing tower maintenance on one of their towers. I was going to replace the guy wires, bolts, redo the anchors (not a big fan of how it is done), install guy wire brackets, etc. Essentially it is a complete overhaul of the tower.
The tower is 150' Rohn 25G. The guy anchors are placed at 51', 51', and 44' from the base (can't be any more because of the lot). Rohn used to have a PDF document going over the requirements for anchors, guy wires, etc. for different guy anchor positions. I cannot find this document, and all I can find is the standard one with the standard 120' anchor placement from the base. Do any of you have any recommendations or documentation on how to figure out the correct materials to be used to support this tower? Moving the guy anchor positions out is not an option. Regards, Chuck Hogg Shelby Broadband 502-722-9292 [email protected] <mailto:[email protected]> http://www.shelbybb.com <http://www.shelbybb.com> -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
