Myself included, nobody wants to climb it. I'm just trying to see if there is any documentation that says this can be done. Obviously it was some idiot that put it up...which is why I'm trying to see if it can even be safely engineered with anchors at these positions.
FWIW, I contacted Radian/Rohn. They said because of the new Rev G standard, they do not release any documentation for this type of application. At a minimum, it should be 70% of the height. Regards, Chuck Hogg Shelby Broadband 502-722-9292 [email protected] http://www.shelbybb.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Blake Bowers Sent: Thursday, April 08, 2010 12:29 PM To: WISPA General List Subject: Re: [WISPA] OT: Rohn 25G Tower Help <<<< SHUDDER >>>> Don't take your organs to heaven, heaven knows we need them down here! Be an organ donor, sign your donor card today. ----- Original Message ----- From: "Chuck Hogg" <[email protected]> To: <[email protected]>; "WISPA General List" <[email protected]> Sent: Thursday, April 08, 2010 10:53 AM Subject: [WISPA] OT: Rohn 25G Tower Help > We purchased a WISP and are doing tower maintenance on one of their > towers. I was going to replace the guy wires, bolts, redo the anchors > (not a big fan of how it is done), install guy wire brackets, etc. > Essentially it is a complete overhaul of the tower. > > > > The tower is 150' Rohn 25G. The guy anchors are placed at 51', 51', and > 44' from the base (can't be any more because of the lot). Rohn used to > have a PDF document going over the requirements for anchors, guy wires, > etc. for different guy anchor positions. I cannot find this document, > and all I can find is the standard one with the standard 120' anchor > placement from the base. Do any of you have any recommendations or > documentation on how to figure out the correct materials to be used to > support this tower? Moving the guy anchor positions out is not an > option. > > > > Regards, > > Chuck Hogg > > Shelby Broadband > 502-722-9292 > [email protected] <mailto:[email protected]> > > http://www.shelbybb.com <http://www.shelbybb.com> > > > > > > ------------------------------------------------------------------------ -------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ------------------------------------------------------------------------ -------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
