http://www.rohnnet.com/
They are very helpful folks. I pieced together stuff for a gin pole for rohn25 not too long ago with their help. Justin -- Justin Wilson <[email protected]> http://www.mtin.net/blog Wisp Consulting Tower Climbing Network Support Chuck Hogg wrote: > We purchased a WISP and are doing tower maintenance on one of their > towers. I was going to replace the guy wires, bolts, redo the anchors > (not a big fan of how it is done), install guy wire brackets, etc. > Essentially it is a complete overhaul of the tower. > > > > The tower is 150' Rohn 25G. The guy anchors are placed at 51', 51', and > 44' from the base (can't be any more because of the lot). Rohn used to > have a PDF document going over the requirements for anchors, guy wires, > etc. for different guy anchor positions. I cannot find this document, > and all I can find is the standard one with the standard 120' anchor > placement from the base. Do any of you have any recommendations or > documentation on how to figure out the correct materials to be used to > support this tower? Moving the guy anchor positions out is not an > option. > > > > Regards, > > Chuck Hogg > > Shelby Broadband > 502-722-9292 > [email protected] <mailto:[email protected]> > > http://www.shelbybb.com <http://www.shelbybb.com> > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
