It's about 500 to 600 meters. The indicated throughput using the speed test 
tool from the web gui says 65Mbps both directions. But I like the 162 number 
better! : - )

Greg

On Apr 14, 2010, at 12:38 PM, Jerry Richardson wrote:

> Damn!
> 
> Distance?
> 
> Whats the actual TCP/IP throughput on that?
> 
> 
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On 
> Behalf Of Greg Ihnen
> Sent: Wednesday, April 14, 2010 9:59 AM
> To: WISPA General List
> Subject: Re: [WISPA] UBNT "M" Was: Ubiquiti made no points today
> 
> Do you mean like this? Notice the rssi on the lower pic. These are two NS5Ms 
> setup as a backhaul. I was assuming the rssi is being wrongly reported since 
> the TX/RX is 162/162. If the rssi was for real wouldn't one chain be 
> reporting a very low connection speed, right? I'm getting 162Mbps on both 
> directions.
> 
> This is one end of backhaul, this NS5M running station wds: rssi -51/-56
> 
> 
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
> 
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to