yeah, turn your power WAYYYYYYY down! That'll give you a -51 signal at 4 miles. You only need a -65 to get top speed with high availability. You'd even do well with -70.
Not sure if you can turn the cards down to 10dB or not but that's about all you'll need for output. I'd set the noise floor to a -75 or -80 too. marlon ----- Original Message ----- From: "Akinlolu Ajayi-Obe" <[email protected]> To: <[email protected]> Sent: Tuesday, April 27, 2010 11:23 PM Subject: [WISPA] MT PtP I want to setup an MT point to point using two MT 411 boards, 350mw cards and a 23db rootena. Distance is 7km. Is there anything I need to tweak or watch out for? New to MT. I have setup a basic link and tested in the office. Thanks Akin Sent from my BlackBerry® smartphone -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
