I have verified with a spectrum analyzer you can run two cards stacked on
top in a 433 in the same 5.8 band as long as the channels you are using are
at complete opposite ends of the band. 5745 and 5825 and 20mhz channels and
they will not bleed over.
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Mike Hammett
Sent: Thursday, May 06, 2010 6:21 PM
To: WISPA General List
Subject: Re: [WISPA] New WISP
Usually 5.8 to the tower, and 5.2 for the repeater. I haven't done any
repeaters like this since DFS. I do have a couple at 2.4.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On 5/6/2010 4:22 PM, Josh Luthman wrote:
Are you saying you have two radios in the 433? Are they the same band?
The 411 and 433 share the same horsepower, in case anyone didn't recognize
that.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
"Success is not final, failure is not fatal: it is the courage to
continue that counts."
--- Winston Churchill
On Thu, May 6, 2010 at 5:21 PM, Mike Hammett<[email protected]>
wrote:
Most of my repeater sites are about $150 - $200 more than the CPE. I
upgrade to a 433 from a 411, add another radio, bulkhead pigtail,
jumper, cheap omni or sector.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On 4/27/2010 10:19 AM, Josh Luthman wrote:
All of my repeater sites have 0 infrastructure cost. I'm using a TV
tower,
grain leg, etc. This means the only additional cost is a NEMA box,
cheap
battery, mt box and omni. Roughly $400. If I get one customer at 35/mo
it
takes a year for ROI. Two customers six months, etc. I typically
charge
45/mo and get 3 people a day after the AP is up. Looking at my third
screen
I've three repeater sites (at least) with only three subs.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
"Success is not final, failure is not fatal: it is the courage to
continue
that counts."
--- Winston Churchill
On Tue, Apr 27, 2010 at 11:01 AM, Marlon K.
Schafer<[email protected]>wrote:
15 per ap? Man I WISH I could do that out here!
I barely break even on a site at 15 subs. (I really hate the sites
with 3
to 5 subs on them :-( ).
I think my highest site is up to 76 subs or so. Got a couple of them
like
that. They are certainly feeling the strain but we're out of channels
in
2.4.
For the busier sites I've started to install 5.8 gig systems over the
top
of
the 2.4 and charge a little more for it. So far people would still
rather
go with the cheaper stuff even though it's much less consistent in it's
performance.
For one site I have finally broken down and just install the 5.8 and
sell
it
at the same price as the 2.4 just so that I can get people moved.
Now if I could just get more/cheaper backhaul out here.
marlon
----- Original Message -----
From: "Josh Luthman"<[email protected]>
To: "WISPA General List"<[email protected]>
Sent: Monday, April 26, 2010 5:59 PM
Subject: Re: [WISPA] New WISP
Several little repeater sites I have are Mikrotik APs and Ubiquiti
CPEs.
No
more then 15 stations on each AP off the top of my head.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
"Success is not final, failure is not fatal: it is the courage to
continue
that counts."
--- Winston Churchill
On Mon, Apr 26, 2010 at 8:38 PM, Chuck Hogg<[email protected]>
wrote:
Hi Liam:
We are a WISPA Vendor and the largest WISP in KY (just an hour or so
away from you).
I'm not exactly sure what you are after, but I am guessing it is the
billing software? We have decided to use Platypus from Tucows after
many issues with our homegrown alternative. We are in the
implementation phase, so we'll let you know how that goes.
We have extensive knowledge and have used Trango, Ubiquiti, MikroTik,
Tranzeo, and Motorola Canopy. Hands down, Motorola Canopy handles the
most clients with the best throughput. Ubiquiti and MikroTik are a
somewhat cheaper alternative, but work well in low-sub count
situations.
Feel free to give DJ a call, 800-405-9865 and he can guide you in the
right direction.
Regards,
Chuck Hogg
Shelby Broadband
502-722-9292
[email protected]
http://www.shelbybb.com
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On
Behalf Of Liam Cummings
Sent: Monday, April 26, 2010 5:50 PM
To: [email protected]
Subject: [WISPA] New WISP
Hi all,
We are a technologies solutions company located in Cincinnati and
trying
to become a WISP. We are running into two road blocks.
1 - We need to choose software that doesn't need a coder to operate
2 - Choosing the right access points and other equipment
We would love to here your thoughts.
Any input would be much appreciated! :-)
------------------------------------------------------------------------
--------
WISPA Wants You! Join today!
http://signup.wispa.org/
------------------------------------------------------------------------
--------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
