Yeah, changed the AP to all 10MHz but still having fade outs. Spectrum analyzer shows a few consistnt holes I could drop into that should work perfectly with 5MHz. I'll try it on 2 sectors for a bit.
Bob- ----- Original Message ----- From: "Leon D. Zetekoff" <wa4...@backwoodswireless.net> To: <wireless@wispa.org> Sent: Sunday, May 09, 2010 6:38 PM Subject: Re: [WISPA] 5MHz Channel Drawbacks? > On 05/09/2010 05:33 PM, Robert West wrote: >> I have an area that's developed some noise and after watching the >> spectrum analyzer all week I'm thinking of going to 5MHz channels there. >> I'm using 5GHz UBNT APs with all MIMO CPEs. I did a test with 5MHz width >> and was hitting 32.5mbps TX, 13mbps RX throughput so that part is cool >> but are there any drawbacks with going with 5MHz channels??? >> > have u tried 10 mHz channels? > > leon > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/