|
Hi Everyone, I had a bunch of my equipment burnt on a tower. Previously I had all Tranzeo. Now I put up a Powerstation2 for my main AP with a Tranzeo 17 dbi sector. I'm getting a max throughput of around 3 mbits. That's looking at the throughput graphs in the PS2. Once I'm reaching that throughput though, pings to certain clients go way up to over 2 seconds. I do my testing from linux, using ping <IP> -i .01 -s 1024 or even take the 1024 up to 2048. I can do this to 3 clients at 1024 packet size.. Once I start pushing it to a 4th client, pings get lost and replies come back 2 seconds later. Is this normal?? I'm looking into it because I have clients complaining they loose connection completely sometimes. When I ping to 3 clients, I can hardly ping any other clients. no response. I've pinged the AP during this whole time and it never flaps. Very solid at a few ms. The previous Tranzeo AP had no problems. Clients are mostly Tranzeo SL2s and their distances vary from 1/2 mile to about 3 miles Here's the station list with their signal strength:
Anyone have any idea what it could be? |
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected]
Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
