My guess would be the low symbol rate you have on a few clients. Try getting their signal better, or temporarily disabling them to see if that helps.
---- ---- ---- ---- Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P. http://uplogon.com | +1 906 774 4847 | [email protected] On 8/12/2010 12:56 PM, Mark Dueck wrote: > Hi Everyone, > > I had a bunch of my equipment burnt on a tower. Previously I had all > Tranzeo. Now I put up a Powerstation2 for my main AP with a Tranzeo 17 > dbi sector. I'm getting a max throughput of around 3 mbits. That's > looking at the throughput graphs in the PS2. Once I'm reaching that > throughput though, pings to certain clients go way up to over 2 > seconds. I do my testing from linux, using > > ping <IP> -i .01 -s 1024 or even take the 1024 up to 2048. > > I can do this to 3 clients at 1024 packet size.. Once I start pushing > it to a 4th client, pings get lost and replies come back 2 seconds later. > > Is this normal?? I'm looking into it because I have clients complaining > they loose connection completely sometimes. When I ping to 3 clients, I > can hardly ping any other clients. no response. I've pinged the AP > during this whole time and it never flaps. Very solid at a few ms. > > The previous Tranzeo AP had no problems. Clients are mostly Tranzeo > SL2s and their distances vary from 1/2 mile to about 3 miles > > Here's the station list with their signal strength: > > Station MAC Signal, dBm Noise, dBm Tx Rate Rx Rate > Idle (sec) > 00:15:6D:1A:0A:05 <http://172.20.0.3/stalist.cgi#> -54 -96 48M > 36M 0 > 00:60:B3:E9:24:25 <http://172.20.0.3/stalist.cgi#> -69 -96 24M > 18M 0 > 00:13:4F:10:09:0F <http://172.20.0.3/stalist.cgi#> -49 -96 48M > 36M 0 > 00:15:6D:1A:0F:D7 <http://172.20.0.3/stalist.cgi#> -74 -96 11M > 18M 0 > 00:13:4F:00:C5:DB <http://172.20.0.3/stalist.cgi#> -78 -96 18M > 5M 15 > 00:1C:F0:EA:57:06 <http://172.20.0.3/stalist.cgi#> -75 -96 11M > 11M 0 > 00:13:4F:00:C5:C2 <http://172.20.0.3/stalist.cgi#> -72 -96 36M > 18M 15 > 00:60:B3:45:37:60 <http://172.20.0.3/stalist.cgi#> -75 -96 11M > 12M 0 > 00:13:4F:00:97:96 <http://172.20.0.3/stalist.cgi#> -52 -96 54M > 36M 0 > 00:13:4F:00:8E:E5 <http://172.20.0.3/stalist.cgi#> -64 -96 48M > 11M 0 > 00:13:4F:00:A6:E6 <http://172.20.0.3/stalist.cgi#> -65 -96 36M > 24M 0 > 00:13:4F:00:C3:91 <http://172.20.0.3/stalist.cgi#> -77 -96 5M > 12M 15 > 00:13:4F:00:B7:FA <http://172.20.0.3/stalist.cgi#> -82 -96 36M > 1M 15 > 00:60:B3:59:89:54 <http://172.20.0.3/stalist.cgi#> -72 -96 36M > 18M 0 > 00:13:4F:00:C5:C4 <http://172.20.0.3/stalist.cgi#> -77 -96 18M > 12M 0 > 00:13:4F:00:A7:00 <http://172.20.0.3/stalist.cgi#> -76 -96 11M > 12M 15 > 00:0B:6B:37:E5:2B <http://172.20.0.3/stalist.cgi#> -67 -96 24M > 36M 15 > 00:13:4F:10:01:D5 <http://172.20.0.3/stalist.cgi#> -54 -96 11M > 36M 0 > 00:13:4F:00:8B:83 <http://172.20.0.3/stalist.cgi#> -68 -96 36M > 18M 0 > 00:13:4F:00:D8:08 <http://172.20.0.3/stalist.cgi#> -81 -96 12M > 1M 0 > 00:13:4F:10:02:3E <http://172.20.0.3/stalist.cgi#> -73 -96 48M > 12M 30 > 00:60:B3:E9:22:A0 <http://172.20.0.3/stalist.cgi#> -84 -96 1M > 12M 0 > > > > Anyone have any idea what it could be? > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
