Yes, wisp-router.com usually has them. You just unscrew the 4 screws around the dipole and screw in the dual pol feedhorn.
Chris ----- Original Message ----- From: "Chris Gotstein" <[email protected]> To: "WISPA General List" <[email protected]>; <[email protected]> Sent: Friday, September 17, 2010 2:36 PM Subject: [WISPA] Convert Single Pol to Dual Pol > We have some older Pac Wireless 2' 5.8Mhz 29db parabolic dishes serving > as a PtP link. We are going to be upgrading the radios connected to > these dishes, and the new radios support dual polarity. Does anyone > know if you can just swap out the feed horn on the dishes from single > pol to dual pol? Would sure be easier than hauling up a whole new dish > setup. If this would work, anyone got sources that i can buy just a > feed horn? Thanks. > > -- > ---- ---- ---- ---- > Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P. > http://uplogon.com | +1 906 774 4847 | [email protected] > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
