We don't charge if it is put in an obvious location....but if they plant a tree we charge $75. Regards,
Chuck On Mon, Sep 20, 2010 at 4:52 PM, ~NGL~ <[email protected]> wrote: > Do you charge when you have to relocate and rewire the equipment at a > clients location, because the trees have grown to a point where the signal > is very weak? If so at what rate? > NGL > > -------------------------------------------------- > From: "Chris Gotstein" <[email protected]> > Sent: Monday, September 20, 2010 1:19 PM > To: <[email protected]> > Subject: Re: [WISPA] Convert Single Pol to Dual Pol > > > Thanks guys! > > > > ---- ---- ---- ---- > > Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P. > > http://uplogon.com | +1 906 774 4847 | [email protected] > > > > On 9/20/2010 3:14 PM, Philip Dorr wrote: > >> DA5W-29-DP-FEED > >> > >> On Mon, Sep 20, 2010 at 3:05 PM, Chris Gotstein <[email protected]> > >> wrote: > >>> I'm having a heck of a time finding the dual pol feed horns. Anyone > >>> have a part number for them? > >>> > >>> ---- ---- ---- ---- > >>> Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P. > >>> http://uplogon.com | +1 906 774 4847 | [email protected] > >>> > >>> On 9/17/2010 5:42 PM, David E. Smith wrote: > >>>> > >>>> > >>>> On Fri, Sep 17, 2010 at 14:36, Chris Gotstein <[email protected] > >>>> <mailto:[email protected]>> wrote: > >>>> > >>>> We have some older Pac Wireless 2' 5.8Mhz 29db parabolic dishes > >>>> serving > >>>> as a PtP link. We are going to be upgrading the radios connected > >>>> to > >>>> these dishes, and the new radios support dual polarity. Does > >>>> anyone > >>>> know if you can just swap out the feed horn on the dishes from > >>>> single > >>>> pol to dual pol? Would sure be easier than hauling up a whole new > >>>> dish > >>>> setup. If this would work, anyone got sources that i can buy just > >>>> a > >>>> feed horn? Thanks. > >>>> > >>>> > >>>> I forget where we bought the feedhorns from, but this can be done. > >>>> > >>>> We actually just replaced two of them, doing exactly what you > describe. > >>>> There was a catch, though. The feedhorn has two N connectors, a few > >>>> inches and ninety degrees apart. One of the two dishes had a smaller > >>>> hole in the center, and my climber had to take up snips and a rasp, > and > >>>> basically put a small notch in the center of the dish, to get the new > >>>> feedhorn to fit. The other dish was older, or newer, or something, and > >>>> already had a suitable small notch in the center. > >>>> > >>>> David Smith > >>>> MVN.net > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > -------------------------------------------------------------------------------- > >>>> WISPA Wants You! Join today! > >>>> http://signup.wispa.org/ > >>>> > -------------------------------------------------------------------------------- > >>>> > >>>> WISPA Wireless List: [email protected] > >>>> > >>>> Subscribe/Unsubscribe: > >>>> http://lists.wispa.org/mailman/listinfo/wireless > >>>> > >>>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >>> > >>> > -------------------------------------------------------------------------------- > >>> WISPA Wants You! Join today! > >>> http://signup.wispa.org/ > >>> > -------------------------------------------------------------------------------- > >>> > >>> WISPA Wireless List: [email protected] > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >> > >> > >> > -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: [email protected] > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: [email protected] > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
