Here's some craziness some may not play with..... I use the PoE USB injectors to power them up with the lowly netbook's USB port... (hasn't failed with any UBNT device yet) to hang and aim. So they will perform fine at 5v on a short leash to get them in place. Then power up to 24v.... Unless, of course, it's an older (Old?) 5Ghz AirGrid, then it will be toast.....
Nobody- From: [email protected] [mailto:[email protected]] On Behalf Of RickG Sent: Thursday, November 04, 2010 8:47 PM To: WISPA General List Subject: Re: [WISPA] NS2 with 24v I've been running the UBNT 24 volt power supplies on several of my tower UBNT radios due to the reset feature. Mike @ UBNT says 24 is fine. In fact, he says new NS2's & 5's will be coming with 24 volt power supplies. BTW: Watch out because the POE & LAN ports are opposite of their 15 volt units! On Thu, Nov 4, 2010 at 11:28 AM, Jason Hensley <[email protected]> wrote: Will an NS2 run on 24v or will it fry it? ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
