Sorry, I'll add that I don't believe it picks a random channel. On a large hub I have, I have 9 backhauls on it and with auto channel, they separate very nicely. If I reboot them all, they never ever settle on the same channel. You can watch them scan if you look at the main page and they will eventually settle onto a channel. This hub had, or had, most 10MHz channels, one 40MHz channel and 2 20MHz channels and with every reboot they never overlapped no matter the channel width which I honestly didn’t expect.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, November 10, 2010 10:31 PM To: WISPA General List Subject: Re: [WISPA] UBNT AUTO Channel I don't believe auto channel is intelligent, or changes based on any criteria, it just randomly picks a channel. I'm not sure it should help with your throughput. I've got a post open on their forum to try and determine exactly how the "auto" selection under frequency selection works. In my lab it doesn't ever change no matter what kind of signal I throw at it, it just stays fixed on some random channel it picks after selection of the option. Regards Michael Baird ----- Original Message ----- From: "Robert West" <[email protected]> To: "WISPA General List" <[email protected]> Sent: Wednesday, November 10, 2010 10:25:08 PM GMT -05:00 US/Canada Eastern Subject: Re: [WISPA] UBNT AUTO Channel I’d add that because of this, I was able to reduce a 40MHz link down to a 20 and a few 20’s down to 10 and still keep my throughput. I just can’t argue with that. From: [email protected] [mailto:[email protected]] On Behalf Of Robert West Sent: Wednesday, November 10, 2010 9:43 PM To: 'WISPA General List' Subject: Re: [WISPA] UBNT AUTO Channel The 5.3 Beta 2 does. I leave AirSelect off but set the channel to AUTO with Obey Regulatory rules checked. Bob- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Hammett Sent: Wednesday, November 10, 2010 8:49 PM To: WISPA General List Subject: Re: [WISPA] UBNT AUTO Channel I wasn't aware they had an auto frequency ability. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com On 11/10/2010 7:32 PM, Robert West wrote: FYI………… I’m hesitant to jump into UBNT Beta firmware for large scale deployment, lesson learned the hard way……… But the latest includes channel hopping and Auto channel. I’ve had ongoing issues with random interference and every couple of weeks or so have had to change my frequencies on pretty much all my UBNT radios. But I took the plunge with this new beta and it’s been SOLID for me for a week now. I tried the channel hopping but it was too busy for me. My noise floor was all over the place. SUCKED and way too random for me BUT just doing a simple AUTO channel…………. Smooth as silk! My interference is now GONE. My throughput has increased and my noise floor went from an average -85 to a -95 to -100 average. Running 5GHz on all links…….. I call this one a WIN! As I said, FYI. Nothing but good on this UBNT Beta. It’s about time! J Just sharing. Me- -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
