And here I am thinking all this time that I was the only one who would appreciate a device like this! I spoke with someone at Streakwave a few months ago about this and basically got a blank stare response. He had no idea why I would want such a thing..<sigh>
So, to any manufacturers up to the task, here is (IMO) a starting point of a bullet point list for the PoE device I'm envisioning: (1) Multi-port models. (e.g. 6, 12 & 24 ports) (2) SNMP & Web Interface Management with ACL firewall. (3) Redundant power supplies with separate power cords. (e.g. UPS "Blue" & UPS "Red") (4) Dip switch DC polarity selectable per port. (e.g. Trango/Canopy vs. UBNT, etc.) (5) Dip switch 12VDC, 24VDC, 48VDC passive and standard 802.3af selectable per port. (6) 1U shallow depth form factor. (7) Auto-Ping per port. (8) LED Status indicators per port. (9) Optional DC power source model for solar sites? (10) Optional Trango Apex/Orion GigE model? What else would be beneficial in the design of this PoE controller? Best, Brad From: [email protected] [mailto:[email protected]] On Behalf Of Mark Nash Sent: Monday, February 28, 2011 10:53 AM To: WISPA General List Subject: Re: [WISPA] non-802.3 rackmount poe switch I may be off here from the majority, but I don't want a switch. I want to be able to put these onto router ports as well as switch ports. I just want a rackmount multiport passive PoE controller, manageable per port with autoping and redundant power supplies. Is that so much to ask for??? ;) On 2/25/2011 9:42 PM, Brad Belton wrote: Once they add remote management, redundant power supplies and a "Auto-Ping" feature they'll have a winner. Best, Brad From: [email protected] [mailto:[email protected]] On Behalf Of Jerry Richardson Sent: Friday, February 25, 2011 11:29 PM To: WISPA General List Subject: Re: [WISPA] non-802.3 rackmount poe switch Just put in a 12 port 24V version of this for a UniFi WLAN. Worked flawlessly. Powered the UBNT PB5 on one of the ports too. - Jerry From: [email protected] [mailto:[email protected]] On Behalf Of Nick Sent: Friday, February 25, 2011 8:45 PM To: [email protected] Subject: Re: [WISPA] non-802.3 rackmount poe switch http://www.streakwave.com/Itemdesc.asp?ic=TP-NCMS312-18 <http://www.streakwave.com/Itemdesc.asp?ic=TP-NCMS312-18&eq=&Tp=> &eq=&Tp= On 2/25/2011 5:52 PM, Jason Bailey wrote: Anyone have a good vendor for a rackmount poe switch for ubnt gear?Getting kinda messy with all the zip-ties and double-sided tape ;) Thanks! Jason ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1204 / Virus Database: 1435/3468 - Release Date: 02/25/11 ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
