opps! V-pol on chain 1
On 3/13/2012 9:02 PM, Blair Davis wrote:
Reverse them. Put the H-pol omni on chain 0 and the V-pol on
chain. Works much better.
Not sure why, but my field testing proved it.
On 3/13/2012 5:42 PM, Ryan Ghering wrote:
We are looking into a situation like this, using a
900 Vertical Omni with on chain 0 and a Horizontal Omni on chain
1
with about 10 foot pf spacing between the two. I too would
like to know if anyone else has done this..
Ryan
On Tue, Mar 13, 2012 at 3:28 PM,
Jason Bailey <[email protected]>
wrote:
What I did was
connect the omni to one port,connected a h-pol 9db
panel and pointed it toward the majority of
customers.
--- On Tue, 3/13/12, Eduardo <[email protected]>
wrote:
From: Eduardo <[email protected]>
Subject: [WISPA] Omni antenna for a rocket M900
To: "WISPA General List" <[email protected]>
Date: Tuesday, March 13, 2012, 5:26 PM
I have
some customers inside a 1
mile radius of a POP. We want to
use a rocket M900 with an omni
antenna and put a dummy load on
the other RPSMA lead, since we
couldn't find any MIMO 900MHz omni
available.
Does
anyone have any experience doing
this?
Thanks,
Eduardo
Webjogger
Internet Services
-----Inline Attachment Follows-----
|
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
--
Ryan Ghering
Network Operations - Plains.Net
Office: 970-848-0475 - Cell: 970-630-1879
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
|
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
