What is the gain of those omnis? Eduardo
----- Original Message ----- From: Ryan Ghering To: WISPA General List Sent: Tuesday, March 13, 2012 5:42 PM Subject: Re: [WISPA] Omni antenna for a rocket M900 We are looking into a situation like this, using a 900 Vertical Omni with on chain 0 and a Horizontal Omni on chain 1 with about 10 foot pf spacing between the two. I too would like to know if anyone else has done this.. Ryan On Tue, Mar 13, 2012 at 3:28 PM, Jason Bailey <[email protected]> wrote: What I did was connect the omni to one port,connected a h-pol 9db panel and pointed it toward the majority of customers. --- On Tue, 3/13/12, Eduardo <[email protected]> wrote: From: Eduardo <[email protected]> Subject: [WISPA] Omni antenna for a rocket M900 To: "WISPA General List" <[email protected]> Date: Tuesday, March 13, 2012, 5:26 PM I have some customers inside a 1 mile radius of a POP. We want to use a rocket M900 with an omni antenna and put a dummy load on the other RPSMA lead, since we couldn't find any MIMO 900MHz omni available. Does anyone have any experience doing this? Thanks, Eduardo Webjogger Internet Services www.webjogger.net -----Inline Attachment Follows----- _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless -- Ryan Ghering Network Operations - Plains.Net Office: 970-848-0475 - Cell: 970-630-1879 ------------------------------------------------------------------------------ _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
