http://www.cdw.com/shop/products/Belkin-200ft-Multimode-ST-ST-Duplex-Fiber-Optic-Patch-Cable/517878.aspx
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Tom DeReggi" <[email protected]> To: "WISPA General List" <[email protected]> Sent: Wednesday, March 21, 2012 2:56:53 PM Subject: [WISPA] Licensed 1ft dish? Are both 18Ghz and 11Ghz limited to minimum 2ft dish size? Just wondering if 1ft was allowed? I know, some might ask "why"? Because its for a really short link (200 ft) that has to be 350mb+ FDX, but dont want to use 60G millimeterwave, because the viable mounting options are not stable enough to prevent sway and safely reliably support that tight of a narrow beamwidth. I'm pretty sure, I'll end up doing this in 23G, which allows 1ft dish, (similar beamwidth to 11G with 2ft). But just wanted to double check rules for 18 and 11. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: Chuck Hogg To: [email protected] ; WISPA General List Sent: Friday, March 16, 2012 10:23 AM Subject: Re: [WISPA] Preventing stupid outages I don't think you understand. A GFCI outlet is a "mechanical" device. You can't reboot it. Regards, Chuck On Fri, Mar 16, 2012 at 10:19 AM, Victoria Proffer < [email protected] > wrote: Can you set it on an auto-ping? Victoria Proffer STLWiMAX, LLC 314-974-5600 From: Brian Webster [mailto: [email protected] ] Sent: Friday, March 16, 2012 9:02 AM To: [email protected] ; 'WISPA General List' Subject: RE: [WISPA] Preventing stupid outages The remote reboot power strip does nothing for you if the GFCI outlet or breaker has tripped, that needs to be reset unless it’s an auto reset device. Thank You, Brian Webster www.wirelessmapping.com www.Broadband-Mapping.com From: [email protected] [ mailto:[email protected] ] On Behalf Of Victoria Proffer Sent: Friday, March 16, 2012 9:40 AM To: 'WISPA General List' Subject: Re: [WISPA] Preventing stupid outages Is there a remote power strip that can be activated by a cell phone? i.e. strip ==== <cell phone > pstn > my computer Victoria Proffer STLWiMAX, LLC 314-974-5600 From: [email protected] [mailto:[email protected]] On Behalf Of Ryan Ghering Sent: Friday, March 16, 2012 8:20 AM To: WISPA General List Subject: Re: [WISPA] Preventing stupid outages We don't use them at towers, but I have here at home auto resetting GFCI outlets for my Saltwater reef tank. Got them from Home Depot.. They reset automatically after a few mins.. Ryan On Fri, Mar 16, 2012 at 7:08 AM, Matt Hoppes < [email protected] > wrote: You have to have GFCI outlets indoors? I've never heard of that regulation before. A few thoughts come to mind: * Battery backup with 2 or so hours of run time along with a remote page for a power outage. Doesn't prevent you from having to dispatch but it keeps you from having an outage. * Re-check code? I don't understand why you need a GFCI outlet inside your shack. You don't have a sink or other water nearby. I don't have GFCI outlets in my office. Maybe I'm missing something here. If you are mounting an outdoor NEMA box with your equipment and just plugging into a GFCI then maybe you can figure out some way to get a hardwire into the box rather than plugging into an outside GFCI? On 3/16/12 9:04 AM, Troy Settle wrote: > Ok, so to keep to code, we have a GFCI outlet for most of our towers. > One of them tripped last night, causing me to have to put on some 80 > miles just to push a button (yes, it could have been much worse). > > Is there anything to prevent stupid outages like this from happening > without violating code? > > Thanks, > > -- > > Troy Settle, Network Administrator > > The Wired Road Authority > > 1117 E. Stuart Dr. > > Galax, VA 24333 > > (276) 238-0049 (office) > > (276) 237-3890 (cell) > > [email protected] > > > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless -- Ryan Ghering Network Operations - Plains.Net Office: 970-848-0475 - Cell: 970-630-1879 _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
