They actually starting coming with removable rubber doors... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Aug 31, 2012 at 1:34 PM, Chuck Hogg <ch...@shelbybb.com> wrote: > Now I remember that same cover is covered by a little steel plate on the > 5GHz...thus Victoria is correct in that you need a serial cable to connect > to it. Per the manual it also states that and how to wire one if you don't > have it. > > Regards, > Chuck > > > > On Fri, Aug 31, 2012 at 1:32 PM, Chuck Hogg <ch...@shelbybb.com> wrote: > >> Ok, well then I don't know. I thought they were the same unit as the >> 900's with different frequency. The 900's have that port covered with a >> rubber grommet that has a reset button on the board. The grommet also >> covers the LEDs. I looked at the manual of the 5830AP and that looked to >> be the same unit. >> >> Regards, >> Chuck >> >> >> >> On Fri, Aug 31, 2012 at 1:20 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> That's only on the FOX radios according to that manual. >>> >>> I don't see the button on my bigger units, 5800 and 5830. >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg <ch...@shelbybb.com> wrote: >>> >>>> On the bottom there is a reset button under the rubber plug. >>>> >>>> Pressing the reset button will reset the radio's IP address to factory >>>> default of 192.168.100.100, and password trango. >>>> >>>> I confirmed this with the manual: >>>> >>>> http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf >>>> >>>> Regards, >>>> Chuck >>>> >>>> >>>> >>>> On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle <wl-t...@loosle.com>wrote: >>>> >>>>> 5830AP >>>>> >>>>> >>>>> >>>>> Chuck Hogg <ch...@shelbybb.com> >>>>> Friday, August 31, 2012 9:45 AM >>>>> What model radio is this? >>>>> >>>>> Regards, >>>>> Chuck >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Wireless mailing list >>>>> Wireless@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> Tony C. Loosle <wl-t...@loosle.com> >>>>> Friday, August 31, 2012 9:42 AM >>>>> I need to factory reset the radio as the ip it was configured with >>>>> was lost. >>>>> >>>>> t >>>>> >>>>> >>>>> _______________________________________________ >>>>> Wireless mailing list >>>>> Wireless@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> Sam Tetherow <tethe...@shwisp.net> >>>>> Friday, August 31, 2012 9:29 AM >>>>> Can you log in, or is that the problem? >>>>> >>>>> _______________________________________________ >>>>> Wireless mailing list >>>>> Wireless@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> tcl <t...@loosle.net> >>>>> Thursday, August 30, 2012 6:00 PM >>>>> Any old timers here remember how to reset a trango 58 series ap? >>>>> >>>>> t >>>>> >>>>> >>>>> _______________________________________________ >>>>> Wireless mailing list >>>>> Wireless@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> >>>>> _______________________________________________ >>>>> Wireless mailing list >>>>> Wireless@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Wireless mailing list >>>> Wireless@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> >>> >>> _______________________________________________ >>> Wireless mailing list >>> Wireless@wispa.org >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> >> > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > >
<<inline: compose-unknown-contact.jpg>>
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
