If memory serves me.... there is a button under the rubber boot on the bottom on the AP. http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf. Or if you want to find the IP address of the unit, connect the radio to a computer that is running wireshark, Power cycle the unit. When the unit powers up, it will displat the IP address of the radio.
Good luck, Joe Miller www.dslbyair.com 228-831-8881 Quoting "Tony C. Loosle" <[email protected]>: > 5830AP > > > >> Chuck Hogg <mailto:[email protected]> >> Friday, August 31, 2012 9:45 AM >> What model radio is this? >> >> Regards, >> Chuck >> >> >> >> _______________________________________________ >> Wireless mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/wireless >> Tony C. Loosle <mailto:[email protected]> >> Friday, August 31, 2012 9:42 AM >> I need to factory reset the radio as the ip it was configured with was lost. >> >> t >> >> >> _______________________________________________ >> Wireless mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/wireless >> Sam Tetherow <mailto:[email protected]> >> Friday, August 31, 2012 9:29 AM >> Can you log in, or is that the problem? >> >> _______________________________________________ >> Wireless mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/wireless >> >> tcl <mailto:[email protected]> >> Thursday, August 30, 2012 6:00 PM >> Any old timers here remember how to reset a trango 58 series ap? >> >> t >> >> >> _______________________________________________ >> Wireless mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/wireless >> _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
