Towers we do TnB. They're awesome! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Apr 16, 2013 7:47 PM, "ralph" <ralphli...@bsrg.org> wrote:
> Of course they are black now.**** > > But they were white when they were white.**** > > And black (allegedly UV resistant) ties are used outdoors a lot, for many > things.**** > > Bet you even have some on your tower. **** > > And yes, we use hose clamps. The tie is a pointless inclusion in the > packaging.**** > > ** ** > > *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On > Behalf Of *Josh Luthman > *Sent:* Tuesday, April 16, 2013 6:58 PM > *To:* WISPA General List > *Subject:* Re: [WISPA] Waterproofing the NanoBridge**** > > ** ** > > First off they're black now. Have been for some time.**** > > Secondly, who uses zip ties outdoors?!**** > > I have a radio on the roof pointing home. I just went up there today to > look at our stuff and saw it had rotated 90 off. Using two of those zip > ties. Turns out it happened around Christmas, but today I hose clamped it > as it should be.**** > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373**** > > On Apr 16, 2013 6:51 PM, "ralph" <ralphli...@bsrg.org> wrote:**** > > Oops, I typed all this up before I read the OP again and saw it was about > NanoBridges and not NanoStations.**** > > But I was proud of it, so I’m sending it anyway. lol**** > > **** > > **** > > **** > > The first step in waterproofing the NanoStation is:**** > > **** > > NEVER, NEVER, EVER, EVER use that stupid white wire tie they come with to > mount it!**** > > The foil tape holding it folded is worth more that the wire tie itself. > Come to think of it, I should have gotten a roll of the foil tape and used > it for mounting.**** > > **** > > If you use the white one, you will be back in 3 years and the Nano will be > hanging upside down by its wire, filled with water.**** > > **** > > **** > > **** > > *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On > Behalf Of *Josh Luthman > *Sent:* Tuesday, April 16, 2013 1:15 PM > *To:* WISPA General List > *Subject:* Re: [WISPA] Waterproofing the NanoBridge**** > > **** > > I know we've seen it with our limited Picos and Nanobridges. The sticker > covering the LED hole lets water in =(**** > > > **** > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373**** > > **** > > On Tue, Apr 16, 2013 at 1:09 PM, Matt Hoppes <mhop...@indigowireless.com> > wrote:**** > > Say what? NanoBridges are pretty much an all-in-one piece of plastic... > shouldn't be anything to water proof. > > > Matt Hoppes > Director of Information Technology > Indigo Wireless > +1 (570) 723-7312**** > > > On 4/16/13 1:08 PM, ~NGL~ wrote: > > Because of the problems I have had with the Bullets, I wonder if there > > is any thing I should do to waterproof the NB's? > > Thanx > > NGL**** > > > If you can read this Thank A Teacher. > > And if it's in English Thank A Soldier! > > > > > >**** > > > _______________________________________________ > > Wireless mailing list > > Wireless@wispa.org > > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless**** > > **** > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless**** > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > >
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
