Let us know what you find.... ----- Original Message ----- From: David Hannum To: WISPA General List Sent: Thursday, June 13, 2013 8:14 AM Subject: Re: [WISPA] Strange problem with Canopy 9000APC
Swapped antennas first, thinking that might have been the issue. Did not help. I've heard off list from a couple of others who are experiencing the same exact issue. And like us, it's limited to a given tower or towers. We have 9000APC all over the place. This is the only spot for this problem. I'm wondering about static on this fiberglass shell tower . . . But we ran a dedicated ground to both the antenna mount and the LPU on the CAT-5. And overnight it went out. Dave Hannum New Era Broadband On Thu, Jun 13, 2013 at 9:06 AM, Jason Bailey <[email protected]> wrote: Antenna has a dead short. Just a guess. --- On Thu, 6/13/13, David Hannum <[email protected]> wrote: From: David Hannum <[email protected]> Subject: [WISPA] Strange problem with Canopy 9000APC To: "WISPA General List" <[email protected]> Date: Thursday, June 13, 2013, 7:43 AM We're having an issue with a 9000APC that is very strange. Here is the situation. We have a remote water tank (stand pipe 75' high) that has a few homes around it. So, we have a 9000APC and a connectorized 2450AP on the tower, both on Omni's. The antennas are on a stand almost exactly 4' apart. There are six subs on the 900MHz radio. About a month ago, I had an issue where (after about 9 months) the signal to all of the customers just faded out, to the point that only two subs were still good. I swapped the antenna and that did not help. I swapped the radio, and that fixed the problem. Trouble is, it only lasted about three weeks, and the same thing happened again. I swapped the radio again yesterday, and today, I'm back in the same boat. The radio in the AP keeps going out. I had the climbers check the grounding, and we actually ran a dedicated ground yesterday off the water tank. My knee jerk feeling today is that maybe the radios are too close together, and the 2450 is burning up the 900. Could this be the case? Any ideas? Here is an example of what happens. Customers that run signals -47 to -57 become -70 to -75 and those who's signals were -70 and up fall clear off. Swap the radio, and everything goes back to normal. This is now three radios that have gone, each lasting a much shorter time than the previous. (this one did not make it 24 hours). I can't completely rule out lightning - the tower is in a very wooded area. But usually you burn up the NIC in that case - not weaken the radio. Thoughts? Dave Hannum New Era Broadband -----Inline Attachment Follows----- _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless ------------------------------------------------------------------------------ _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
