Check with Nello www.nelloinc.com
On 7/30/2013 1:58 PM, Joshua Zukerman wrote:
Hello list,
I am setting up a PtP link between two gas stations for a client. I am
going to be using two Nanostation M5 units going about 1/2mi
diagonally across a highway. I'd like to mount them to a 5ft mast then
to a non-penetrating roof mount, as the only place with clear
line-of-sight is on the roof of both gas stations. Flat roof without
much of a lip to mount an antenna to. All of my Google searches come
up with much larger non-penetrating roof mounts, 3' or wider, which
are designed for much larger and taller masts. Also very pricey, $150
or more each.
Does anyone make a small non-penetrating roof mount, say 2ft square
out of metal with an attachment to hold a 5ft mast or including a 5ft
mast? Maybe a single cinder/cement block to weigh it down would be all
that is needed. Won't ever need to go higher.
Or do you have another suggestion for mounting?
Thanks in advance,
Josh
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com>
Version: 2013.0.3392 / Virus Database: 3209/6535 - Release Date: 07/30/13
--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration
Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060
(765) 439-4253
(855) 231-6239
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
